MT-300N-V2 led for VPN

StuartFL · 2021-10-17T18:43:08.885Z

I just updated my router firmware 3.203.
My middle led no longer is showing a VPN connection.

I installed Luci. There is no blue led in the drop down menu for led set up.

Any advice on how to regain this feature?
Thanks.

alzhao · 2021-10-19T06:27:49.357Z

StuartFL:

There is no blue led in the drop down menu for led set up

What LEDs are in the list? There should no blue LED for MT300N-V2

StuartFL · 2021-10-19T09:03:39.917Z

Here’s what comes up after the upgrade.

It used to use the middle led to show activity on the VPN.

Here is the drop down when I select edit for the first line.

There are two “greens”.
What is the correct entry for LED name, trigger and device?

alzhao · 2021-10-19T15:25:56.923Z

I think the middle LED is the “gl-mt300n-v2:green:wan”

StuartFL · 2021-10-19T21:38:11.494Z

The web page says it should be blue.

Documentation for GL.iNet Productions

I cannot get it to work.

alzhao · 2021-10-20T01:24:10.866Z

Just omit the color.

What is your trigger, device and trigger mode?

For wireguard, it should be
trigger: netdev
device: wg0
trigger mode: Receive

StuartFL · 2021-10-20T12:41:09.076Z

Got it. Thank you.
After making changes to led line item and “Save & Apply”, it was necessary to reboot the device to have it take effect.