MT1300 (Beryl) now has 4.x firmware in beta (4.1.0 beta 3 is out)

sammutd88 · 2023-03-13T20:40:01.419Z

I prefer to change SoC to a Qualcomm product. They’ve always been stable for me. Mediatek, not so much.

agnelli · 2023-04-08T22:32:34.714Z

Edit: The solution to the below problem for me was to hold the factory reset button on the router for 15 seconds or so.

I upgraded using the file openwrt-mt1300-4.1.0-1107-1667792228.bin and can no longer login to the admin panel located at http://192.168.8.1/#/login using the default password of “goodlife”.

jjross · 2023-04-20T15:32:23.538Z

Any idea when we can expect another release or the final?

alzhao · 2023-05-03T06:31:49.027Z

Should be in Q2. The snapshot is continuously updated.

perylberyl · 2023-06-08T11:55:30.836Z

I just installed the 4.3.2 beta 1. The first thing i noticed is that the network storage under Applications is missing completely. Is it possible to install it via plugins?

jo.butagaz · 2023-06-08T12:57:37.812Z

Yep, it looks good that this Fw is still in dev and not frozen at 4.1.0b3.
What are changelog?
Thx U.
Fred

elorimer · 2023-06-08T15:46:35.802Z

Start here: 4.2.3 Beta Firmware Release Notes: GL-AXT1800 Slate AX, GL-AX1800 Flint

jo.butagaz · 2023-06-08T21:32:49.478Z

Thank you elorimer,

But it seems it’s not for beryl/MT1300 and FW is 4.2.3b1… seaching for 4.3.2b1 target router

yuxin.zou · 2023-06-09T01:55:08.569Z

You can see at the free storage space…
Beryl has only 32 MB total. We don’t want to remove the network storage either, but the device is really not free of space.

perylberyl · 2023-06-09T11:20:22.577Z

Hi and thanks for the reply!
If I understand it correctly now, in future releases the Beryl wont be able to utilize its own sd card or is it just temporary? Otherwise the sd card slot will be useless and users as I do use the slot.

jo.butagaz · 2023-06-09T12:07:06.931Z

Just installed from V4.1.0b3 to V4.3.2b1…

20230609_135706

perylberyl · 2023-06-09T20:09:55.800Z

Can I have the link where you found it please? Thank you!

K3rn3l_Ku5h · 2023-06-09T20:37:11.514Z

Version: 4.3.2 beta1
https://dl.gl-inet.com/?model=mt1300&type=beta

This link changes when a update is made to the Firmware download page.

perylberyl · 2023-06-10T11:51:34.600Z

Thank you, I am familiar with the download section. However I did installed the latest beta and rolled back to 4.1.0 b3 because its supports network storage. If 4.2.2 had the same function I would like this version but dont know where to find it

sparky66 · 2023-06-11T10:11:22.509Z

I have done the same thing because of network storage

MT1300 (Beryl) + GL-SFT1200 (Opal) 4.x Latest firmware issues Technical Support for Routers

Both the latest firmware from both devices have had file sharing removed could you link me firmware 4x with file sharing in it. thanks

yuxin.zou · 2023-06-12T01:25:14.003Z

We will try to refactor the network storage module to install it on older products. But not in version 4.3.2.

jjross · 2023-06-20T04:38:14.621Z

I took my Beryl traveling and found that my Sonos Roam was not seen by my Sonos app. Is there a confit change I need to make? This worked fine in v3.

Lomik · 2023-06-20T07:38:42.108Z

Is it possible to get additional applications unlocked (network storage, adGuard, Parental Control, Tailscale) for those of us that run 4.3.2. with extroot?
How to add official openwrt feeds for missing packages?

yuxin.zou · 2023-06-20T07:46:18.886Z

They were removed on older products not because of storage space, but because the CPU couldn’t handle the load.

Lomik · 2023-06-20T07:57:14.152Z

Is it possible to get them back for experimental use?