MT1300 (Beryl) now has 4.x firmware in beta (4.1.0 beta 3 is out)

alzhao · 2023-05-03T06:31:49.027Z

Should be in Q2. The snapshot is continuously updated.

perylberyl · 2023-06-08T11:55:30.836Z

I just installed the 4.3.2 beta 1. The first thing i noticed is that the network storage under Applications is missing completely. Is it possible to install it via plugins?

jo.butagaz · 2023-06-08T12:57:37.812Z

Yep, it looks good that this Fw is still in dev and not frozen at 4.1.0b3.
What are changelog?
Thx U.
Fred

elorimer · 2023-06-08T15:46:35.802Z

Start here: 4.2.3 Beta Firmware Release Notes: GL-AXT1800 Slate AX, GL-AX1800 Flint

jo.butagaz · 2023-06-08T21:32:49.478Z

Thank you elorimer,

But it seems it’s not for beryl/MT1300 and FW is 4.2.3b1… seaching for 4.3.2b1 target router

yuxin.zou · 2023-06-09T01:55:08.569Z

You can see at the free storage space…
Beryl has only 32 MB total. We don’t want to remove the network storage either, but the device is really not free of space.

perylberyl · 2023-06-09T11:20:22.577Z

Hi and thanks for the reply!
If I understand it correctly now, in future releases the Beryl wont be able to utilize its own sd card or is it just temporary? Otherwise the sd card slot will be useless and users as I do use the slot.

jo.butagaz · 2023-06-09T12:07:06.931Z

Just installed from V4.1.0b3 to V4.3.2b1…

20230609_135706

perylberyl · 2023-06-09T20:09:55.800Z

Can I have the link where you found it please? Thank you!

K3rn3l_Ku5h · 2023-06-09T20:37:11.514Z

Version: 4.3.2 beta1
https://dl.gl-inet.com/?model=mt1300&type=beta

This link changes when a update is made to the Firmware download page.

perylberyl · 2023-06-10T11:51:34.600Z

Thank you, I am familiar with the download section. However I did installed the latest beta and rolled back to 4.1.0 b3 because its supports network storage. If 4.2.2 had the same function I would like this version but dont know where to find it

sparky66 · 2023-06-11T10:11:22.509Z

I have done the same thing because of network storage

MT1300 (Beryl) + GL-SFT1200 (Opal) 4.x Latest firmware issues Technical Support for Routers

Both the latest firmware from both devices have had file sharing removed could you link me firmware 4x with file sharing in it. thanks

yuxin.zou · 2023-06-12T01:25:14.003Z

We will try to refactor the network storage module to install it on older products. But not in version 4.3.2.

jjross · 2023-06-20T04:38:14.621Z

I took my Beryl traveling and found that my Sonos Roam was not seen by my Sonos app. Is there a confit change I need to make? This worked fine in v3.

Lomik · 2023-06-20T07:38:42.108Z

Is it possible to get additional applications unlocked (network storage, adGuard, Parental Control, Tailscale) for those of us that run 4.3.2. with extroot?
How to add official openwrt feeds for missing packages?

yuxin.zou · 2023-06-20T07:46:18.886Z

They were removed on older products not because of storage space, but because the CPU couldn’t handle the load.

Lomik · 2023-06-20T07:57:14.152Z

Is it possible to get them back for experimental use?

yuxin.zou · 2023-06-20T08:15:22.950Z

Network Storage is scheduled to be rebuilt and will be included in the official firmware when the rebuilds are complete.
No other features are planned for adaptation.
You should be able to install AdGuard Home by yourself.

greekgod1820 · 2023-07-19T12:26:22.456Z

@jjross I would check to see what port your Sonos app uses to connect to your Sonos Roam alot of times the port apps use is also used by something else preventing their default communication when traveling.

jjross · 2023-07-19T14:17:26.744Z

There shouldn’t be any firewall rules blocking inter-LAN communication between devices so Im not sure that’s the issue.

The Sonos forum seems to indicate that they use SSDP for discovery so perhaps multicast traffic is being blocked or dropped on wifi.