# MT3000, Firmware 4.6.4 and Starlink

**URL:** <https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540>\
**Category:** Router\
**Created:** [October 1, 2024, 7:40pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540 "2024-10-01T19:40:35Z")\
**Posts on this page:** 8\
**Page:** 2

<div class="post-metadata">

**Author:** ![kiltym](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/e274bd/32.png) [@kiltym](https://forum.gl-inet.com/u/kiltym)\
**Post date:** [October 25, 2024, 3:50pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/23 "2024-10-25T15:50:32Z")

</div>

Thank you. I will install and post feedback as soon as possible.

---

<div class="post-metadata">

**Author:** ![kiltym](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/e274bd/32.png) [@kiltym](https://forum.gl-inet.com/u/kiltym)\
**Post date:** [October 29, 2024, 4:40pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/24 "2024-10-29T16:40:44Z")

</div>

If I have the disconnect, what information do I post? Is there extra logging in the normal logs?

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [October 30, 2024, 3:08am UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/25 "2024-10-30T03:08:24Z")

</div>

You can post the whole log. Better to send to @JerryZhao via message directly.

---

<div class="post-metadata">

**Author:** ![kiltym](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/e274bd/32.png) [@kiltym](https://forum.gl-inet.com/u/kiltym)\
**Post date:** [November 11, 2024, 4:59pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/26 "2024-11-11T16:59:34Z")

</div>

Sent a message to Jerry with the logs after a disconnect happened.

---

<div class="post-metadata">

**Author:** ![Davidliu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/439d5e/32.png) [@Davidliu](https://forum.gl-inet.com/u/Davidliu)\
**Post date:** [November 28, 2024, 10:20am UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/27 "2024-11-28T10:20:51Z")

</div>

Hi, can you help to try mt3000 4.6.6-op24 will have the same problem? Here is the link: [GL.iNet download center](https://dl.gl-inet.com/router/mt3000/open)

---

<div class="post-metadata">

**Author:** ![kiltym](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/e274bd/32.png) [@kiltym](https://forum.gl-inet.com/u/kiltym)\
**Post date:** [November 29, 2024, 3:55pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/28 "2024-11-29T15:55:15Z")

</div>

Can I save settings from the router (on 4.6.8 beta1) when I install this version? Or do I need to do a full reset of all settings?

Also, does it have support for USB Network Storage and DLNA built in?

Thanks

---

<div class="post-metadata">

**Author:** ![admon](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/admon/32/32880_2.png) [@admon](https://forum.gl-inet.com/u/admon)\
**Post date:** [November 29, 2024, 3:57pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/29 "2024-11-29T15:57:52Z")

</div>

Switching between "normal" firmware and "op24" firmware always includes a complete reset of your device. Don't keep settings.

---

<div class="post-metadata">

**Author:** ![system](https://forum-static.gl-inet.com/original/3X/7/7/77e28f6cb342ac4bd641bd9a6254595d61b2812a.png) [@system](https://forum.gl-inet.com/u/system)\
**Post date:** [May 28, 2025, 3:57pm UTC](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540/30 "2025-05-28T15:57:52Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.

[Previous page](https://forum.gl-inet.com/t/mt3000-firmware-4-6-4-and-starlink/48540.md?page=1)
