# MT300A and OpenWRT 18.06 support **URL:** \ **Category:** Router\ **Created:** [June 16, 2018, 4:26am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831 "2018-06-16T04:26:59Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![x-maysonnave](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/x/f0a364/32.png) [@x-maysonnave](https://forum.gl-inet.com/u/x-maysonnave)\ **Post date:** [June 16, 2018, 4:26am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/1 "2018-06-16T04:26:59Z")
Hi All, While building our firmware I noticed the following report from the builder. Here are the issued warnings: make[3] -C target/linux install Pseudo file “/dev” exists in source filesystem “/work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/root-ramips/dev”. Ignoring, exclude it (-e/-ef) to override. /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (unit\_address\_vs\_reg): Node /cpus/cpu@0 has a unit name, but no reg property /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (unit\_address\_vs\_reg): Node /cpuintc@0 has a unit name, but no reg property /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (unit\_address\_vs\_reg): Node /pcie@10140000/pcie-bridge has a reg or ranges property, but no unit name /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (pci\_bridge): Node /pcie@10140000/pcie-bridge node name is not “pci” or “pcie” /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (pci\_bridge): Node /pcie@10140000/pcie-bridge missing ranges for PCI bridge (or not a bridge) /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (pci\_bridge): Node /pcie@10140000/pcie-bridge missing bus-range for PCI bridge /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (unit\_address\_format): Failed prerequisite ‘pci\_bridge’ /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (pci\_device\_reg): Failed prerequisite ‘pci\_bridge’ /work/firmware/MT300A/openwrt.18.06/openwrt-18.06/build\_dir/target-mipsel\_24kc\_musl/linux-ramips\_mt7620/gl-mt300a-kernel.bin.dtb: Warning (pci\_device\_bus\_num): Failed prerequisite ‘pci\_bridge’ Thanks ---
**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\ **Post date:** [June 20, 2018, 2:26pm UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/2 "2018-06-20T14:26:25Z")
@kyson-lok maybe you can have a look. ---
**Author:** ![kyson-lok](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/kyson-lok/32/185_2.png) [@kyson-lok](https://forum.gl-inet.com/u/kyson-lok)\ **Post date:** [June 21, 2018, 1:10am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/3 "2018-06-21T01:10:38Z")
@x-maysonnave The warning is caused by mt7620a.dtsi which is mt7620a generic header. Is there any exception for your firmware with the warning information? ---
**Author:** ![x-maysonnave](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/x/f0a364/32.png) [@x-maysonnave](https://forum.gl-inet.com/u/x-maysonnave)\ **Post date:** [June 21, 2018, 5:35am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/4 "2018-06-21T05:35:23Z")
Thanks for you feedback. I face some stability issue with the 18.06 and tried to understand the root cause. In my my current configuration dnsmasq doesn’t automatically start as it does with the 17.01 branch. I made this report as I’m unable to analyse such low level warnings. You’re in a better position than me to provide feedback to OpenWrt/Mediatek/Mips package maintainers. Anyway our production firmware is 17.01 based. Keep up your good work. ---
**Author:** ![kyson-lok](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/kyson-lok/32/185_2.png) [@kyson-lok](https://forum.gl-inet.com/u/kyson-lok)\ **Post date:** [June 21, 2018, 7:58am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/5 "2018-06-21T07:58:00Z")
We will change to openwrt-18.06 on next release. Does dnsmasq not run automatically or it can’t assign ip address for client? ---
**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\ **Post date:** [October 29, 2025, 2:56am UTC](https://forum.gl-inet.com/t/mt300a-and-openwrt-18-06-support/3831/6 "2025-10-29T02:56:25Z")