MT300N-V2 - connect to openvpn on startup?

djmarcone · 2018-11-13T13:47:59.247Z

I have a PIA subscription and it works fine with this device.

However, I seem to have to connect to the MT300 web interface and force the openvpn to connect. When I arrive at a location and plug in and turn on the MT300 the VPN does not connect automatically.

What am I missing?

kyson-lok · 2018-11-14T03:14:01.760Z

What does it show on OpenVPN status filed? Do you use the latest firmware?

glitch · 2018-11-14T09:21:35.191Z

Is the “location” saved? If not, then surely this behavior is normal. You cannot connect to the VPN because you need to connect to the network first.

alzhao · 2018-11-14T10:23:14.194Z

The router need to connect to the Internet before it can connect to vpn.

I think your network was not connected.

djmarcone · 2018-11-14T12:56:21.945Z

I think alzhao is correct, the procedure needs to be connect network cable to known good port first then power up router.

djmarcone · 2018-11-14T12:57:03.414Z

I think you are correct!