MT300N-V2 upgrade 3.212 VPN Led

StuartFL · 2022-05-05T17:52:20.031Z

I just upgraded my firmware to 3.212.
The middle LED no longer shows wg0 connection and activity.
I checked the setup and it still shows the configuration.
Actual VPN switch works properly.
Is this a bug, or do I need to modify a setting?
Thank you.

alzhao · 2022-05-06T09:30:49.045Z

Install Luci, go to system->LED configuration, edit the LED for wan and change it to wg0

StuartFL · 2022-05-06T10:41:39.455Z

I previously checked that. Also, I confirmed that the VPN is activated and working.

Screen Shot 2022-05-06 at 6.37.28 AM1920×1200 60.7 KB

alzhao · 2022-05-10T10:44:55.725Z

I just tried exactly the same.

The LED indicate wireguard correctly.

I only need to reboot the router to let it take effect after settings.