# Mt300n-v2 VPN LED does not stay after reboot or VPN switch

**URL:** <https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023>\
**Category:** Router\
**Created:** [July 13, 2018, 7:24pm UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023 "2018-07-13T19:24:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![GL-FUN](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/gl-fun/32/942_2.png) [@GL-FUN](https://forum.gl-inet.com/u/GL-FUN)\
**Post date:** [July 13, 2018, 7:24pm UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/1 "2018-07-13T19:24:19Z")

</div>

mt300n-v2 with Version: 2.271 does not retain the settings for its middle LED after reboot or VPN on/off - the settings for the middle LED swithch to WiFi interface. Please, advise

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [July 14, 2018, 4:38am UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/2 "2018-07-14T04:38:14Z")

</div>

So is any other things normal? Only LED changed?

Can you fix this in luci → system → LED?

@kyson-lok pls verify this problem.

---

<div class="post-metadata">

**Author:** ![GL-FUN](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/gl-fun/32/942_2.png) [@GL-FUN](https://forum.gl-inet.com/u/GL-FUN)\
**Post date:** [July 14, 2018, 8:42am UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/3 "2018-07-14T08:42:36Z")

</div>

yes, POWER\_LED and WIFI\_LED retain its default settings. Only the middle LED when configured to indicate VPN status resets itself after VPN off/on or reboot. middle LED resets to WWAN and no interface is being selected.

---

<div class="post-metadata">

**Author:** ![kyson-lok](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/kyson-lok/32/185_2.png) [@kyson-lok](https://forum.gl-inet.com/u/kyson-lok)\
**Post date:** [July 14, 2018, 10:25am UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/4 "2018-07-14T10:25:59Z")

</div>

If you are experience in CLI, you can ssh to router, Edit **/etc/init.d/startvpn** , delete those lines:

```auto
if ["$switch_disabled" != "1"]; then
		uci set system.vpn='led'
		uci set system.vpn.default='0'
		uci set system.vpn.name='vpn'
		uci set system.vpn.sysfs="$led"
		uci set system.vpn.trigger='netdev'
		uci set system.vpn.dev='tun0'
		uci set system.vpn.mode='link tx rx'
		uci commit system
	fi

```

Configuring the middle LED in luci again.

---

<div class="post-metadata">

**Author:** ![GL-FUN](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/gl-fun/32/942_2.png) [@GL-FUN](https://forum.gl-inet.com/u/GL-FUN)\
**Post date:** [July 14, 2018, 11:02am UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/5 "2018-07-14T11:02:16Z")

</div>

works! tanks plot  
PS: I so like this little toy!!

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 2:56am UTC](https://forum.gl-inet.com/t/mt300n-v2-vpn-led-does-not-stay-after-reboot-or-vpn-switch/4023/6 "2025-10-29T02:56:29Z")

</div>


