# Mudi 7 battery percentage on LCD/web UI stays at 100 % for hours after unplugging — is this expected?

**URL:** <https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848>\
**Category:** Router\
**Created:** [May 21, 2026, 9:27am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848 "2026-05-21T09:27:04Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![nakitel](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/n/258eb7/32.png) [@nakitel](https://forum.gl-inet.com/u/nakitel)\
**Post date:** [May 21, 2026, 9:27am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/1 "2026-05-21T09:27:04Z")

</div>

Hi,

Logging a finding from a few weeks of using a Mudi 7 (E5800) with last firmware:

When I unplug the charger from a freshly-charged unit and let it sit on battery, the **LCD on the case and the web UI both stay at 100 %** for what looks like 1–3 hours, then drop fairly quickly to track the actual charge. During that window, the kernel fuel-gauge driver in `/sys/class/power_supply/<battery>/capacity` correctly decreases (I measured 100 → 88 % over 1 h 37 min under ~1.5 W load).

So the cell IS losing charge, the chip on the board knows it, but the MCU layer that feeds the LCD and the web UI smooths it to "still 100 %" until enough has passed. Voltage / current / temperature numbers all agree with the fuel-gauge that it's a real discharge — not a sensor glitch.

Couple of questions for GL.iNet (and the wider community in case anyone has already dug into this):

1. **Is the headroom hold intentional?** I assume yes — most users probably appreciate that "freshly charged" stays at 100 for a while instead of instantly flipping to 98. Just want to confirm before filing a bug.

2. **What's the trigger that releases the hold?** A fixed timer, a `voltage_now` threshold, or a delta between the MCU's estimate and the fuel-gauge?

3. **Is there a documented way to read the unsmoothed value from outside the kernel sysfs path?** I'd love a field on `ubus call mcu status` (something like `charge_percent_raw`) so third-party tools don't have to special-case the sysfs path that differs across firmware generations.

Sharing this writeup in case other people noticed the same discrepancy and were wondering whether their battery was sick. It isn't — it's just the MCU being polite at the top of the curve. The cell behaves exactly as advertised; only the displayed percentage lags.

Sample logs:

```auto
MCU=100% sysfs=100% V=4.392 I= -45 mA <- unplug
MCU=100% sysfs= 99% V=4.378 I= -432 mA
MCU=100% sysfs= 97% V=4.350 I= -451 mA
MCU=100% sysfs= 94% V=4.305 I= -460 mA
...
MCU=100% sysfs= 88% V=4.220 I= -461 mA <- T+1h37m

```

For anyone interested in the raw value: my companion app exposes both readings and a toggle to flip between them.

 ![IMG_8203](https://forum-static.gl-inet.com/original/3X/8/6/86911d220e0981741fb23490a42581dbd6c67d30.jpeg)

 ![IMG_8202](https://forum-static.gl-inet.com/original/3X/3/3/3372dc758fe3018be284bc55b61a2598598e95bd.jpeg)

 ![Знімок екрана 2026-05-21 о 12.26.19](https://forum-static.gl-inet.com/original/3X/8/d/8d4d626e62ea626a3558f8f9dd5258a49f074cec.png)

---

<div class="post-metadata">

**Author:** ![bf807bd0](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/87869e/32.png) [@bf807bd0](https://forum.gl-inet.com/u/bf807bd0)\
**Post date:** [June 10, 2026, 5:48pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/4 "2026-06-10T17:48:34Z")

</div>

having the same issue with my Mudi 7 - the battery level displayed in the screen and the UI isn't accurate. I haven't poked around in the kernel yet, but I can corroborate that the battery display is inaccurate.

edit:  
I pulled some screenshots from my Mudi:

 ![image](https://forum-static.gl-inet.com/original/3X/5/6/56dd9abd5ef14b8ea2a0e8ca03f887cc48107867.png)

---

<div class="post-metadata">

**Author:** ![bf807bd0](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/87869e/32.png) [@bf807bd0](https://forum.gl-inet.com/u/bf807bd0)\
**Post date:** [June 10, 2026, 8:08pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/5 "2026-06-10T20:08:57Z")

</div>

since i'm a new user I can't post more than one embedded image, but here's an actual photo of the router I took at thte same time to show that the battery level shows 100% in the display but the system shows it at 97%

 ![image](https://forum-static.gl-inet.com/original/3X/4/c/4c83b39f825b0c8b829da96669f1e4473a3b8780.jpeg)

---

<div class="post-metadata">

**Author:** ![Aashish.007](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/ea5d25/32.png) [@Aashish.007](https://forum.gl-inet.com/u/Aashish.007)\
**Post date:** [June 10, 2026, 10:07pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/6 "2026-06-10T22:07:26Z")

</div>

@bruce @will.qiu

---

<div class="post-metadata">

**Author:** ![madasus1](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/13edae/32.png) [@madasus1](https://forum.gl-inet.com/u/madasus1)\
**Post date:** [June 24, 2026, 11:44am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/8 "2026-06-24T11:44:05Z")

</div>

Same problem here. The problem is it stays at 100% for ages and then I have seen it just die with no power a few minutes later

---

<div class="post-metadata">

**Author:** ![Cathy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9de0a6/32.png) [@Cathy](https://forum.gl-inet.com/u/Cathy)\
**Post date:** [June 25, 2026, 1:54am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/9 "2026-06-25T01:54:23Z")

</div>

Hi,  
Have you tried reconnecting the power supply when the issue happens? May I know what the displayed battery level on the screen is after plugging in the power?

---

<div class="post-metadata">

**Author:** ![madasus1](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/13edae/32.png) [@madasus1](https://forum.gl-inet.com/u/madasus1)\
**Post date:** [June 25, 2026, 10:15am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/10 "2026-06-25T10:15:25Z")

</div>

I think it showed 1% when I connected the charger

---

<div class="post-metadata">

**Author:** ![Cathy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9de0a6/32.png) [@Cathy](https://forum.gl-inet.com/u/Cathy)\
**Post date:** [June 25, 2026, 11:21am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/11 "2026-06-25T11:21:33Z")

</div>

Is the mudi 7 running on v4.8.5? Could you export the **/etc/sys\_log** and share with us for analysis? Thanks

---

<div class="post-metadata">

**Author:** ![madasus1](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/13edae/32.png) [@madasus1](https://forum.gl-inet.com/u/madasus1)\
**Post date:** [June 25, 2026, 11:39am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/12 "2026-06-25T11:39:58Z")

</div>

sent through DM

---

<div class="post-metadata">

**Author:** ![haonan0312](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/h/a4c791/32.png) [@haonan0312](https://forum.gl-inet.com/u/haonan0312)\
**Post date:** [June 30, 2026, 6:00am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/13 "2026-06-30T06:00:53Z")

</div>

I am having the same issue

 ![Screenshot_20260630_014330_Termux](https://forum-static.gl-inet.com/original/3X/9/a/9a9d7247ea9e630209208d719f177a240dafaaa1.jpeg)

---

<div class="post-metadata">

**Author:** ![joker85](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/j/f14d63/32.png) [@joker85](https://forum.gl-inet.com/u/joker85)\
**Post date:** [July 1, 2026, 7:53pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/14 "2026-07-01T19:53:45Z")

</div>

Hi everyone,

Occasionally, the device exhibits the following behavior:

1. I use the router on battery and drain it down to around 46% (or a similar mid-range value), then power it off.

2. When I try to power it back on, the device falsely reports the battery level at **100%**.

3. It starts the boot process but shuts down completely just a few seconds later.

**The Workaround:** The only way I have found to get it to boot is by plugging it into the power supply. Once connected to external power, it boots up normally. After it has booted, I can disconnect the power cable, and the router continues to work perfectly on battery. At this point, it correctly displays the actual battery percentage (e.g., the 46% it had before shutting down) and discharges normally.

Has anyone encountered this battery calibration or boot issue? I'd like to know if this is a known firmware bug that can be fixed via an update, or if I should consider this a hardware defect and proceed with opening a ticket.

Currently running firmware v4.0

---

<div class="post-metadata">

**Author:** ![Cathy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9de0a6/32.png) [@Cathy](https://forum.gl-inet.com/u/Cathy)\
**Post date:** [July 3, 2026, 8:51am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/15 "2026-07-03T08:51:34Z")

</div>

Sorry for the problem. We are currently investigating this issue. Please email [support@gl-inet.com](mailto:support@gl-inet.com) and open a ticket, and our team will follow up on this matter.

---

<div class="post-metadata">

**Author:** ![aenfa](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/db5fbb/32.png) [@aenfa](https://forum.gl-inet.com/u/aenfa)\
**Post date:** [August 3, 2026, 9:59am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/16 "2026-08-03T09:59:53Z")

</div>

I had exactly the same problem this morning. It was at around 60% last night when I turned it off. I started it up this morning but it shut down within a minute. Pressing the power button briefly then showed the battery “100%”. So then had to plug it in for it to boot up and stay on. It then showed the correct battery percentage.

Running firmware 4.8.5

---

<div class="post-metadata">

**Author:** ![nagyimre1980](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/nagyimre1980/32/35990_2.png) [@nagyimre1980](https://forum.gl-inet.com/u/nagyimre1980)\
**Post date:** [August 3, 2026, 10:15am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/17 "2026-08-03T10:15:23Z")

</div>

I have this problem too! When will there be a solution?

---

<div class="post-metadata">

**Author:** ![DK82](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/f14d63/32.png) [@DK82](https://forum.gl-inet.com/u/DK82)\
**Post date:** [August 12, 2026, 8:56pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/18 "2026-08-12T20:56:38Z")

</div>

Same Issue, firmware 4.8.5

---

<div class="post-metadata">

**Author:** ![joujek](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/j/35a633/32.png) [@joujek](https://forum.gl-inet.com/u/joujek)\
**Post date:** [September 5, 2026, 3:03am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/19 "2026-09-05T03:03:18Z")

</div>

HI all,  
Same here - brand new unit.  
Battery had 20% after first boot. Charged to 100% and stays on it for 3 hours now. SSH - cat on the …/capacity shows 86

---

<div class="post-metadata">

**Author:** ![DK82](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/f14d63/32.png) [@DK82](https://forum.gl-inet.com/u/DK82)\
**Post date:** [September 5, 2026, 1:04pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/20 "2026-09-05T13:04:30Z")

</div>

With the new 4.10 update, the problem no longer occurs for me.

---

<div class="post-metadata">

**Author:** ![Taucher](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/t/9fc348/32.png) [@Taucher](https://forum.gl-inet.com/u/Taucher)\
**Post date:** [September 20, 2026, 4:27pm UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/21 "2026-09-20T16:27:57Z")

</div>

My Mudi 7 is behaving strangely. In the UI, the 100% status is displayed for an extremely long time and then suddenly the reading jumps to around 60%. After that, however, the display returns to normal and shows the usual uncharging progress.

Today I charged the router. After just over an hour, the battery was supposedly at 100%. However, I have a charging cable that displays the wattage. Immediately after the 100% battery full indicator appeared, the charging power was still 16 watts. It was only after a further 1½ hours that the cable showed a charging power of 0 watts. I therefore suspect that the battery wasn’t fully charged. Does anyone else have this problem? I am on 4.10.

---

<div class="post-metadata">

**Author:** ![Cathy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9de0a6/32.png) [@Cathy](https://forum.gl-inet.com/u/Cathy)\
**Post date:** [September 23, 2026, 2:23am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/23 "2026-09-23T02:23:01Z")

</div>

Version 4.10 has optimized battery issues.The battery percentage fluctuation of your device may be due to a software reading error. Could you export the /etc/sys\_log from the router and share with us to check? Thank you!

---

<div class="post-metadata">

**Author:** ![Taucher](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/t/9fc348/32.png) [@Taucher](https://forum.gl-inet.com/u/Taucher)\
**Post date:** [September 23, 2026, 4:25am UTC](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848/24 "2026-09-23T04:25:38Z")

</div>

@Cathy I have send the Logs to the Support.

[Next page](https://forum.gl-inet.com/t/mudi-7-battery-percentage-on-lcd-web-ui-stays-at-100-for-hours-after-unplugging-is-this-expected/68848.md?page=2)
