# Mudi 7 dual use case

**URL:** <https://forum.gl-inet.com/t/mudi-7-dual-use-case/72331>\
**Category:** Router\
**Created:** [October 25, 2026, 3:34pm UTC](https://forum.gl-inet.com/t/mudi-7-dual-use-case/72331 "2026-10-25T15:34:44Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![charles2](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9dc877/32.png) [@charles2](https://forum.gl-inet.com/u/charles2)\
**Post date:** [October 26, 2026, 10:19am UTC](https://forum.gl-inet.com/t/mudi-7-dual-use-case/72331/4 "2026-10-26T10:19:33Z")

</div>

Hi,

There is no built-in one-click option to switch between these two modes.

As a workaround, you can configure the router for each mode separately and export a backup of each configuration. When you need to switch modes, you can restore the corresponding backup through LuCI.

> [@How to Export/Import Backup Configuration Files via LuCI](https://forum.gl-inet.com/t/how-to-export-import-backup-configuration-files-via-luci/68190):
>
> Introduction When using a GL.iNet router, you may need to back up your current system configurations or restore previous settings after a reset or firmware upgrade. This guide will walk you through how to export and import your router's backup configuration files via LuCI. Part 1: How to Export Backup Configuration Files via LuCI Step 1: Access the LuCI Advanced Settings Log into your GL.iNet router's web Admin Panel (the default IP address is usually 192.168.8.1). On the left-hand menu, navi…

---

_[View the full topic](https://forum.gl-inet.com/t/mudi-7-dual-use-case/72331)._
