# Multiple SSIDs with WireGuard Routing

**URL:** <https://forum.gl-inet.com/t/multiple-ssids-with-wireguard-routing/64473>\
**Category:** Router\
**Created:** [October 2, 2025, 6:49pm UTC](https://forum.gl-inet.com/t/multiple-ssids-with-wireguard-routing/64473 "2025-10-02T18:49:28Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![xize11](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/xize11/32/5340_2.png) [@xize11](https://forum.gl-inet.com/u/xize11)\
**Post date:** [October 5, 2025, 7:12am UTC](https://forum.gl-inet.com/t/multiple-ssids-with-wireguard-routing/64473/3 "2025-10-05T07:12:20Z")

</div>

Also the limitation is at 2 or 3 ssids per band, one is given up by guest network, it is very possible the code works against your use case because it wants to change the interface.

Instead what you can do if you feel comfortable to do it, but requires exclusively the use of OP24 and vlans is using multi psk, then based by different password you are sent to the vlan network, currently that is what I'm using at my home, for a dumbap scenario you can use: `option vlan_tagged_interface 'eth1'`

You can use either the old `wpa_psk_file` option, or use `wifi-vlan` and `wifi-station`.

I [wrote](https://forum.gl-inet.com/t/script-multipsk-for-openwrt-23-snapshots/43766) a script for this on the forum 👍

What doesn't work with multi psk is fast roaming, it requires a special fix/patch work and requires to compile OpenWrt yourself, WPA3/SAE requires `list mac 'xxx'` inside the wifi-station section and may only works on a even more recenter version of OP24 not sure if GL firmware support that yet.

> **[\[OpenWrt Wiki\] Wi-Fi /etc/config/wireless](https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_stations)**

For vlans I also wrote a up to date tutorial, I also like the videos of onemarcfifty.

> [@Mt-6000 vlan](https://forum.gl-inet.com/t/mt-6000-vlan/64247/6):
>
> I see you have more likely just the factory configuration, nothing points for me what you tried for vlans. so since I sit on my pc now, I can help making a tutorial. First we navigate to interfaces: you will see something like: now click on Devices as shown here: this will result in something like this: on the left tree you can see how the device names are named, br- stanza means it is a bridge, for vlans we want to have bridge vlan filteri…

---

_[View the full topic](https://forum.gl-inet.com/t/multiple-ssids-with-wireguard-routing/64473)._