My OpenVPN client cannot connect to server

wcs2228 · 2022-10-12T23:02:57.020Z

It appears the OpenVPN client is not able to go through the home router to reach the OpenVPN server. This could be because port forwarding is not working, but could also be that the config file has an incorrect remote public IP address, a rule on the home router, or something else.

It is not so easy to test going through the home router on UDP 1194. If you can set up a device (e.g, computer, NAS, appliance) on your home router LAN that has a webpage URL, then you can temporarily port forward TCP 80 (http) or TCP 443 (https) to that device and try accessing the webpage URL from the Internet WAN to verify that works at least.

yzleandro · 2022-10-12T23:46:03.810Z

I do have a Synology NAS connected to my home router. I used DDNS there. The given domain name translates to an IPv4 address as well as an IPv6 address. When I use the IPv4 address to access my NAS portal, it does not work. But when I use the IPv6 address, it does work. That should prove that my port forwarding is not working. Because IPv4 relies on port forwarding, while IPv6 does not.

wcs2228 · 2022-10-13T02:27:56.259Z

Are there any settings on your home router related to enabling/disabling IPv4 functionality?

By the way, GL.iNet DDNS (xxx.glddns.com) also resolves to both IPv4 and IPv6, but I do not personally use IPv6.

yzleandro · 2022-10-13T09:41:06.073Z

I think I might know the cause of port forwarding not working. My ISP does not have a fixed IPv4 address for me, only a fixed IPv6 address. Since my IPv4 public address is shared with other customers, they probably put us under an additional layer of NAT, therefore the port forwarding on my home router does do anything good because it’s not the router that directly connects to the Internet.

However, since IPv6 is not limited to the NAT feature, the DDNS on my Synology NAS successfully resolves my customized domain to an IPv6 address that points directly to my NAS. In order to use IPv6 to set up my VPN server, I have two problems:

GLDDNS doesn’t seem to resolve to an IPv6 address, even if I enabled IPv6 on the GL-AR750S router.
I am not sure if the OpenVPN server app supports IPv6 on GL-AR750S router.

alzhao · 2022-10-13T09:44:51.641Z

yzleandro:

GLDDNS doesn’t seem to resolve to an IPv6 address, even if I enabled IPv6 on the GL-AR750S router.

IPV6 is just added now. But may need firmware update.

yzleandro:

I am not sure if the OpenVPN server app supports IPv6 on GL-AR750S router.

The same. Need to update firmware.

yzleandro · 2022-10-13T10:16:00.749Z

hey @alzhao ,

I just updated my firmware to 3.215. Are you sure the OpenVPN server on the router supports IPv6? I can see the config file .ovpn only lists my public IPv4 address. How should I properly set it up via IPv6?

And my DDNS ax11233.glddns.com still does not resolve to an IPv6, but only an IPv4 address.

alzhao · 2022-10-13T10:24:00.717Z

No. 3.215 still does not support ipv6 for vpn server.

yzleandro · 2022-10-13T11:37:07.155Z

@alzhao Hmm but that’s the latest version I got when I go to the Upgrade tab on the admin portal. What version supports ipv6 server and how do I upgrade to it?

wcs2228 · 2022-10-13T17:34:04.592Z

I also suspected that your ISP was not assigning you a fixed IPv4, but that is not very common and seemed unlikely.

There is a 3.215 beta4 firmware available, but I do not know if it supports IPv6 for OpenVPN. It may be that GL.iNet has to develop a new firmware release.

yzleandro · 2022-10-13T17:52:13.440Z

Yes my ISP does not assign me a fixed IPv4. It is stated on their website. They do, however, assign me fixed IPv6. Unfortunately I only have a public IPv4 that is shared with other home routers (other customers in the building probably), and my home router is not directly connected to the Internet, but only connect to a layer of subnetwork with the internal IP (started with 10.x.x.x). So now I have no choice but to use IPv6 protocal for OpenVPN server.

@alzhao What version of firmware supports ipv6 OpenVPN server? and How do I upgrade to it?

alzhao · 2022-10-14T03:03:32.385Z

The latest firmware should support ipv6 in wireguard and openvpn.

It may have bugs though.

yzleandro · 2022-10-14T03:41:10.325Z

alzhao:

No. 3.215 still does not support ipv6 for vpn server

@alzhao You just told me “ No. 3.215 still does not support ipv6 for vpn server”. So what is the version number that starts to support it? Could you be specific?

alzhao · 2022-10-14T03:42:59.510Z

Sorry I messed up.

It has limited support for IPV6 when using vpn client.

It does not have support for IPV6 when using as vpn server.

yzleandro · 2022-10-14T03:55:28.627Z

Gotcha. That’s a bummer though. Do you have plan to support it in the near future?

alzhao · 2022-10-14T03:57:21.214Z

yzleandro:

Do you have plan to support it in the near future

Yes. Will add support for sure.

fmas2 · 2024-05-27T10:04:52.073Z

Hi wcs2228,
I´m a newbie and sorry for such a simple question. Regarding your comment: Have you enabled Dynamic DNS (DDNS) on the server router and edited the client config file to replace IP address in the “remote” line with the DDNS domain name (xxx.glddns.com
I have edited the client.ovpn file and now can you pls tell me how can I load the new file in the openvpn server.
Many thanks in advance for your help

admon · 2024-05-27T10:05:10.615Z

There is no need to upload the new config to the server. It's a client config.

fmas2 · 2024-05-27T10:17:05.655Z

Hi admon, sorry but I´m talking about editing the client.ovpn file created by the server and not the openvpn.ovpn file created on the client server when loading a vpn provider configuration

admon · 2024-05-27T10:23:37.519Z

So what is your issue right now? And what do you want to do?

fmas2 · 2024-05-27T10:35:37.813Z

The client.ovpn file has this remote 83.40.53.77 1194
and I want to change it with the the remote glddns info and then load it in the openvpn server.
Is that possible?