# Noob asking question about flint 2 ( GL.iNet GL-MT6000) **URL:** \ **Category:** Router\ **Created:** [March 8, 2025, 4:54pm UTC](https://forum.gl-inet.com/t/noob-asking-question-about-flint-2-gl-inet-gl-mt6000/55527 "2025-03-08T16:54:08Z")\ **Posts on this page:** 1\ **Showing post:** 13
**Author:** ![aqui](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/b782af/32.png) [@aqui](https://forum.gl-inet.com/u/aqui)\ **Post date:** [March 10, 2025, 7:44pm UTC](https://forum.gl-inet.com/t/noob-asking-question-about-flint-2-gl-inet-gl-mt6000/55527/13 "2025-03-10T19:44:07Z")
> [@Flintnoob](#): > > I already have some other access points, but I wanted to try something new. Plus, it has some great features: > > - 802.11 a/b/g/n/ac/ax, 4x4 1148Mbps (2.4GHz) > - 802.11 a/b/g/n/ac/ax, 4x4 4804Mbps (5GHz) > > good speeds! > > It runs on OpenWrt and comes with 2x 2.5Gb ports and 4x 1Gb ports. > > For the price of $125, I thought to myself, why not give it a try? > > I also wanted to ask, does it support VLAN tagging on the LAN ports while in AP mode? I've been using the Flint 2 as my main router for months, and so far, I'm very happy with it. Everything works fine, including the Wi-Fi. So far, no disconnecting problems or other related Wi-Fi issues (but other people seem to had problems with this). The wireless speed is actually amazing. I get almost 1Gb download and upload from my PC while on a wireless connection (I have a symmetric 1Gb ISP connection) in my office, about 10 meters away. My previous 200€ ASUS router could not do that. > [@Lastimosa](#): > > These routers would only allow a single SSID per band as well as another SSID per Guest WiFi per band (i.e. max of 4 different SSID). This is not completely true. You can create as many as you want with the advanced mode, LuCI. It's a more complex process, but there is plenty of documentation on how to do it. It is true that you only have 4 SSIDs if you are only using the GL.iNet GUI, but many features are available in LuCI. There is how you can do it while using SSH (a response from a GL.iNet Staff): > [@Create Add Multiple WiFis/Radios Configuration - MT6000 Flint2](https://forum.gl-inet.com/t/wifi-and-subnet-configuration-help-mt6000-flint2/51254/2): > > GL GUI -\> Network -\> Guest network, here can change the subnet IP. The 'br-guest' is hard code. It's not sense and cannot feasible, unless manually custom add a route rule. Add new SSID WiFi for MT6000 (v4.8.3, stable), on the SSH: #Notes: #1. Add 2 new subnets: "br-iot" and "br-custom", with isolation between br-lan. #2. Add separate 2.4 GHz and 5 GHz Wi‑Fi radios for the "iot" and "custom" network. #3. The "From-Specified Connection Types" in the VPN policy mode, support d… --- _[View the full topic](https://forum.gl-inet.com/t/noob-asking-question-about-flint-2-gl-inet-gl-mt6000/55527)._