# Obfsproxy + OpenVPN

**URL:** <https://forum.gl-inet.com/t/obfsproxy-openvpn/1920>\
**Category:** Router\
**Created:** [February 6, 2017, 7:31am UTC](https://forum.gl-inet.com/t/obfsproxy-openvpn/1920 "2017-02-06T07:31:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![forexv](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/b38774/32.png) [@forexv](https://forum.gl-inet.com/u/forexv)\
**Post date:** [February 6, 2017, 7:31am UTC](https://forum.gl-inet.com/t/obfsproxy-openvpn/1920/1 "2017-02-06T07:31:15Z")

</div>

Hello,

I just got a MT300A (and I love it) with firmware 2.25 and I’m wondering if it’s possible to run obfsproxy to hide traffic when using OpenVPN to bypass deep packet inspection?

[https://community.openvpn.net/openvpn/wiki/TrafficObfuscation](https://community.openvpn.net/openvpn/wiki/TrafficObfuscation)

Thanks!

&nbsp;

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [February 6, 2017, 10:40am UTC](https://forum.gl-inet.com/t/obfsproxy-openvpn/1920/2 "2017-02-06T10:40:03Z")

</div>

obfs4proxy use a lot of go libraries and I am not sure if this is easy to install in openwrt.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 2:36am UTC](https://forum.gl-inet.com/t/obfsproxy-openvpn/1920/3 "2025-10-29T02:36:04Z")

</div>