OpenVpn client - do not route all traffic via VPN server

pepper · 2019-07-23T21:24:20.437Z

I have MT300N-V2 with the latest firmware. I have an open vpn server where I generated ovpn file and uploaded this into MT300N. VPN works but it routes all the traffic via VPN. I only want to have a VPN tunnel to my openvpn server so I have an access to the openwrt’s shell in MT300N.
How can I do this?

I tried entering this in ovpn but it did not help:
pull-filter ignore "redirect-gateway"
If I use the same ovpn file from my ubuntu box using command ovpn vpn_connection.ovpn, it works and my internet traffic goes via gateway defined before connecting openvpn.

kyson-lok · 2019-07-24T02:47:28.768Z

If you use mt300n, it should be v2.x firmware, so you can unticked the option “Force all traffic to VPN”.

pepper · 2019-07-24T08:14:22.734Z

Is this in the normal GUI or in the “advanced” luci gui?

kyson-lok · 2019-07-25T02:59:30.319Z

On OpenVPN client page, can you see? If not, please take a screenshot.

pepper · 2019-07-26T20:18:08.093Z

It is not there. See my screenshots. And the firmware is up to date (v 3.012).

2019-07-26_19-451365×786 44.7 KB

pepper · 2019-07-26T20:18:42.731Z

2019-07-26_19-45_11346×741 47.6 KB

pepper · 2019-07-26T20:19:14.515Z

2019-07-26_19-461398×853 61.6 KB

kyson-lok · 2019-07-27T07:02:00.187Z

It is v3.x firmware.

Please refer to this thread. Openvpn configuration to avoid the default redirection (all through the VPN) - #6 by kyson-lok

Andreiko · 2021-01-07T10:06:40.349Z

Hello, I have the problem.

192.168.0.1 - ovpn server

192.168.1.0 - subnet of home router (in which is OVPN server (192.168.0.1 configured)

192.168.99.0 - subnet of PADAVAN router (OVPN CLIENT 192.168.0.2)

192.168.3.0 - subnet of GL-INET MIFI router (OVPN CLIENT 192.168.0.7)

from server subnet (192.168.1.1 i can access subnet (192.168.99.0 - subnet of PADAVAN router).
from 192.168.99.0 - subnet of PADAVAN router i can access 192.168.1.0 subnet.
from 192.168.3.0 - subnet of GL-INET MIFI router i can access both subnets 192.168.1.0 and 192.168.99.0
from subnets 192.168.1.0 and 192.168.99.0 I cannot access subnet (192.168.3.0) of GL-INET MIFI router.
on PADAVAN router has these functions enabled:

Restrict Access from VPN Server Site: No (Site-to-Site), using NAT translation

Obtaining DNS from VPN Server: Replace all existing

Route All Traffic through the VPN interface: Yes

How I can enable same functions as are in PADAVAN router on GL-INET MIFI router? as I understand it’s not working routing because of these functions. Please help me with this. Thank You.

Andreiko · 2021-01-08T15:51:17.644Z

Resolved by myself. If You need some information, can write me.