Ooohh… Ok.
Well I created a client and copied the Interface and Peer sections into the TunSafe config file… by the way ,every time you click on the configuration, wireguard client on the router seems to give a different listen port in the Interface section (?). Changed the Endpoint to the astrorelay address:port in Peer. This was done with the wireguard server stopped. Started the Wireguard server. Tried to connect with TunSafe, no joy… Trying handshakes forever.
In Astrorelay i have 192.168.8.1 and 51820. I must be really bad at this… Also I get the error UdpSocketWin32::Write error 0xC000023D in the log, but only first time after tunsafe install… The plot thickens…
EDIT: tired of it, I installed the Win10 Wireguard client. I got an ‘object already exists’, Googled it, disabled the Tunsafe TAP adapter, copied the config in the Win10 Wireguard client… and TA-DA! Connected! Why the Tunsafe client does not want to work, it is beyond me, as it seems the settings are correct. Well, happy enough and I learned a bit about VPN. BTW I do use VPN on my Billion 7800 VDOX and setup was infinitely easier - but the Billion is not behind CGNAT… Will look at the Tunsafe again when i have time.
EDIT 2: Not sure how, it seems i have used up 1GB of data in just a few minutes and my agent is down. Strange…