Proper way of configure IPv6 in Wireguard

temerosoivan · 2021-11-04T16:04:38.294Z

How do I configure IPv6 in Wireguard client. IPv6 address entered is deemed invalid. On firmware 3.203 on MV1000

alzhao · 2021-11-05T13:21:29.072Z

Can you show the config?

temerosoivan · 2021-11-10T17:30:02.606Z

[Interface]
PrivateKey =
Address = 172.16.0.2/32, fd01:5ca1:ab1e:82d5:4c10:76ef:f965:1713/128
DNS = 1.1.1.1

[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = engage.cloudflareclient.com:2408

alzhao · 2021-11-11T11:32:27.410Z

I just tried your config, using MV1300 3.203, filled some key and the UI just accept it.

temerosoivan · 2021-11-11T18:47:03.682Z

Did it actually provide IPv6 connectivity via Wireguard? I know IPv4 works.