# Remotely connect to LAN via WireGuard on Mango

**URL:** <https://forum.gl-inet.com/t/remotely-connect-to-lan-via-wireguard-on-mango/14898>\
**Category:** Router\
**Created:** [March 19, 2021, 2:59pm UTC](https://forum.gl-inet.com/t/remotely-connect-to-lan-via-wireguard-on-mango/14898 "2021-03-19T14:59:12Z")\
**Posts on this page:** 1\
**Showing post:** 29

<div class="post-metadata">

**Author:** ![T3Knical5urg3](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/t3knical5urg3/32/5846_2.png) [@T3Knical5urg3](https://forum.gl-inet.com/u/T3Knical5urg3)\
**Post date:** [February 10, 2022, 4:18pm UTC](https://forum.gl-inet.com/t/remotely-connect-to-lan-via-wireguard-on-mango/14898/29 "2022-02-10T16:18:42Z")

</div>

I spent some more time trying to solve this so I thought I would record that here:

I found my intended setup is referred to as site-to-site.

- I ensured that my wireguard approved IPs encompass the range of possible IPs. (0.0.0.0/24)
- I had NPV policies on on the [GLI.net](http://GLI.net) client router so I disabled that just in case there was some strange routing going on because of it.
- Ensured that server side has the option “create routes for allowed IPs for the peer”.
- Ensured there is a route in the server side routing table (see: [the thrread](https://forum.gl-inet.com/t/building-a-site-2-site-network-manually-using-two-gl-inet-routers/18294))

I still have had no luck.

---

_[View the full topic](https://forum.gl-inet.com/t/remotely-connect-to-lan-via-wireguard-on-mango/14898)._