Repeater Will Not Connect - Stuck with "Getting..." Notification

buntspext · 2024-10-02T11:54:14.349Z

I found another problem and not sure if its related in any way. After a long time i used the android app (2.6.0) again. In the network list there is nothing displayed under saved networks. See difference between web and app Version.

App:

Screenshot_20241002_134429_glinet1080×2340 132 KB

Web:

Screenshot 2024-10-02 at 13.44.361304×1390 93.8 KB

alzhao · 2024-10-04T04:13:29.089Z

From the log it seems that the connection is failed, not the same as before (connected but didn't get IP).

When it use a new mac address to connect, it connected without problem.

alzhao · 2024-10-04T04:14:01.255Z

I tested my iOS app and it is sill fine. I will let other guys to have a check.

Samongl · 2024-10-05T06:42:47.652Z

I've been struggling with the same "getting" but never connecting issue at several hotels in Spain.

This firmware appears to have worked, though the other stable firmware releases (4.6.2, nor the latest which is 4.6.4) worked.

alzhao · 2024-10-07T04:53:10.546Z

In the smartphone app, extend the left menu

image408×889 49.7 KB

Enable the app log and you will see the log icon.

image597×861 51.6 KB

Then go to repeater section, when you have the "empty" saved network list, click the "log" icon and extend the log. pls post the log here.

tonyx · 2024-10-21T10:11:25.900Z

This worked like a charm! meanwhile version 4.6.8 did not work and I have no idea why. Does it break auto-update though?

buntspext · 2024-10-21T10:47:21.567Z

alzhao:

Then go to repeater section, when you have the "empty" saved network list, click the "log" icon and extend the log. pls post the log here.

Sorry. For the late reply. Just tried with version 4.6.6-op24 and problem still exists. This is the log:

4.zip (9.7 KB)

alzhao · 2024-10-23T09:13:06.128Z

Thanks for the log. From the log actually the API response with the saved ap list.

I am asking developers to check why it is not displayed.

alzhao · 2024-10-23T09:42:44.604Z

Confirmed that the app has bugs and will update.

acong · 2024-10-23T09:45:35.128Z

Confirmed to be an App bug and will be fixed in the next version.

buntspext · 2024-10-23T10:05:41.722Z

Thanks for the info. Then i will wait for the next version.

alzhao · 2024-11-07T07:30:54.635Z

3 posts were split to a new topic: MT3000 4.6.6 repeater cannot get IP address

Monoman · 2024-11-20T05:44:20.514Z

I'm not using the App. I'm using the web admin interface and the latest stable firmware from October 2024. Is there an ETA for a release in the stable channel? What about the beta?

alzhao · 2024-11-20T08:21:47.388Z

I am not sure which problem you refer to.

This post contains multiple questions.

On Oct 2 @buntspext posted a bug of the app. Which @acong was referring to.

If you mean MT3000 cannot get IP address, pls use the op24 firmware.

acong · 2024-11-20T08:38:22.360Z

The bug of not displaying saved wifi has been fixed in the v2.6.0 release

buntspext · 2024-11-20T11:23:20.171Z

Yesterday while sitting on a bus i found, that the App-bug might be still there, while connected via app and not connected via wifi.

But i was not able to reproduce the problem. Maybe somebody else can test.

Monoman · 2024-11-20T12:01:33.544Z

I apologize for my incomplete reply. I am using a GL-X3000 that is currently stuck on "Getting ..." when trying to setup as a repeater in my current location. I have adjusted a variety of settings that are covered in this topic and another I found in another forum section. My router is running the latest stable firmware (4.4.13). I looked at the release notes for the latest beta (4.7.1) but I do not see any mention of this problem being fixed in that version.

I am not sure what the op24 firmware is or where to get it.

alzhao · 2024-11-21T08:24:20.090Z

The problem you mentioned appear on MT3000/MT6000 and it is fixed using op24 firmware.

Unfortunately for X3000 it also has this problem but don't have op24 firmware, due to that X3000 firmware is too complicated.

Monoman · 2024-11-21T12:26:23.059Z

Ok I understand. Is the problem confirmed with the X3000 and being worked on? Do you need me to try anything else to assist?

alzhao · 2024-11-22T01:42:00.105Z

X3000 use the same chipset as MT3000. So it has the same problem.

If for repeater you can uss static IP, that may work. But I am not sure if X3000's firmware support static IP yet.