Replacement Serial Number and MAC-address

Doyle · 2022-06-13T15:36:58.584Z

I have an excellent and elegant router GL-MT300A
How do I change in it Serial Number and MAC-address?
Or destroy them?

alzhao · 2022-06-14T09:47:46.660Z

I am not sure why you want to change or destroy them.

You can destroy the product but the data is stored in our database anyway.

Doyle · 2022-06-14T13:00:18.312Z

Please, I will explain it willingly
I want to use your wonderful router for the Whonix deanimization system as a gateway, which is the first in the chain.
Unfortunately, the Serial Number of the router deanonymizes it and the entire system as a whole.
Therefore, it must either be changed or destroyed.

alzhao · 2022-06-15T03:21:18.056Z

The MAC and SN, is static date stored on the router. It is the same as radio data, which you should not touch.

If you change firmware, the new firmware may not read the sn at all.

But most firmware need to read the mac address. The mac address can be changed in the firmware as well. it does not need to read the factory stored data.

Doyle · 2022-06-16T03:30:41.459Z

Ok, thank you. So, what new firmware should I install so that it does not read and does not transmit s/n anywhere?

LupusE · 2022-06-16T06:00:10.418Z

I am more interested in where do you find the s/n in the traffic? I couldn’t identify it, by a short test.
Except I’m in the admin panel, because it is not httpS://, for given reasons. And if the device itself won’t provide httpS:// only, I would not dig deeper in overcompensating ‘security’.

My Beryl does exactly what I’ve paid for. Providing a more secure ‘private’ network in my RV. I wouldn’t send confidential government documents on this line, but it is enough for checking emails and do amazon shoping.

alzhao · 2022-06-16T07:48:11.025Z

Firmware from OpenWrt is clean.

https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=ramips%2Fmt7620&id=glinet_gl-mt300a

Doyle · 2022-06-17T00:17:16.186Z

LupusE:

I am more interested in where do you find the s/n in the traffic? I couldn’t identify it, by a short test.

Yes, you are right, initially the serial number is not transmitted to the network.
But if we hypothetically assume that a malicious exploit has crept into the system, then it can do this
dirty trick.
Therefore, I want in advance to prevent such a dangerous possibility.

Doyle · 2022-06-17T00:19:09.710Z

alzhao:

Firmware from OpenWrt is clean.

OpenWrt Firmware Selector

Thanks alzhao I will try to use this clean firmware.

Doyle · 2022-07-16T11:28:43.347Z

alzhao ,
I’m sorry, but I didn’t find the firmware clean on this page “OpenWrt Firmware Selector”.
There are only SNAPSHOT and version numbers firmware.
How do I find clean firmware?

alzhao · 2022-07-18T10:32:42.139Z

Have to clarify:

OpenWrt has stable, snapshot etc.
“clean” is only a term that we used. Before when there is no openwrt vanilla firmware for our routers, we will compile a firmware which is like openwrt vanilla firmware, i.e. contains as less software packages as possible. We call it “clean”.

So, all openwrt vanilla firmware is “clean”.

Doyle · 2022-07-19T11:14:47.829Z

alzhao ,

If I understand you correctly, you will choose pure Openwrt with https://firmware-selector.openwrt.org , then add your useful improvements to it and then you put it on your https://forum.gl-inet.com ?

alzhao · 2022-07-19T11:29:34.332Z

Yes you are right. We are based on openwrt.