Router mt-1300 reboots when I power on my nas

Oroville · 2021-09-23T20:03:06.441Z

Router mt-1300 reboots when I power on my nas any clues why?

alzhao · 2021-09-24T10:29:26.919Z

How do you connect these things?

rp201rp · 2021-09-24T22:58:11.477Z

If applicabile, I have found some powered hubs with on/off independent for each usb port cause complete eject/insert when something is plugged in and out. Not sure why but may be applicable. Try differnet try mixing brands/powered usb2.0/3.0 and always do rain dance to hardware gods…cause only god knows what some of these 3rd party hardware manf. were thinking

Oroville · 2021-09-25T09:49:18.756Z

I use my raspberry pi to send a wake on lan magic packet to my nas and or pc via wireguard VPN but once my nas boots it makes my router reboot.

elorimer · 2021-09-25T14:38:57.185Z

Do you have an IP conflict maybe?

It isn’t clear what your topology is. It sounds like you are making a wireguard connection to the Beryl and from a remote connection sending a WOL to a NAS wired to the Beryl LAN. No?

Oroville · 2021-09-26T22:05:45.298Z

I will try and lock the Mac address to the ip. Thanks