S2s wireguard issues

antifascista · 2020-04-14T19:36:00.743Z

Hi,
I tried a s2s with a B1300 (192.168.8.1) server and a MT300N V2 (192.168.10.1) client with allowed ips ‘192.168.8.0’.
Tunnel goes up and devices of client lan can explore devices of server lan but no Internet on client side.
I added the line ‘list subnet 192.168.10.1/24’ in wireguard server configuration in the line of client.
Devices of server lan can explore devices of client lan only if in client router allowed ips is ‘0.0.0.0/0’ but internet goes on client side through server side.
I’d like to reserve s2s only for traffic lan2lan.
Any idea?
Thanks

Thanks

antifascista · 2020-04-15T11:36:00.399Z

Solved configuring wireguard on client router by Luci and assigning WG interface to lan zone under firewall settings.

surabi · 2020-04-30T02:46:28.007Z

This sounds stupid, but would you care to send me the restore file of your current config? I have /had the same problem but ultimately just gave up on it. (Hoping it’s maybe AR750/s or MT300A or MT300N2)

antifascista · 2020-04-30T05:51:48.963Z

Hi,
I tested the scenario and I gave the client router to my friend for his s2s connection office/home so I can’t send configuration to you.
Can I help you in another way?