S2S with Wireguard possible

JackyMcFly · 2023-08-15T10:57:41.504Z

Hello,
my S2S-Network is running only when Wireguard is switched off at my main node.
Is it normal that it dosn’t work if Wireguard is running?

bring.fringe18 · 2023-08-15T21:29:13.091Z

S2S is a WireGuard based service. It’s not possible to run WG Client/Server alongside of S2S on a stock setup, IIRC.

Building a Site-2-Site network manually using two GL.iNet routers(SDK 4.X) VPN, DNS, Leaks

This post is to introduce the guide to config WireGuard LAN to LAN VPN (Site-2-Site) based on GL-iNet SDK 4.X fimrware. Supported Models Router Model Stable Beta GL-MT3000 (Beryl AX) √ - GL-AXT1800 (Slate AX) √ - GL-A1300 (Slate Plus) √ - GL-X3000 (Spitx AX) √ - GL-AX1800 (Flint) √ - GL-MT2500 (Brume 2) √ - GL-AR300M (shadow) - √ GL-MT300N-V2 (Mango) - √ GL-E750 (Mudi) - √ GL-SFT1200 (Opal) - √ GL-MT1300 (Beryl) - √ GL-X750 (Spitz) - √ GL-XE300 (Pul…

Battista.xie · 2023-08-16T01:14:37.260Z

Yes,It is normal. S2S is a WireGuard based service too.

JackyMcFly:

Hello,
my S2S-Network is running only when Wireguard is switched off at my main node.
Is it normal that it dosn’t work if Wireguard is running?

JackyMcFly · 2023-08-20T09:47:32.142Z

Battista.xie:

Yes,It is normal. S2S is a WireGuard based service too.

Thanks for the answears.

I try to change the vpn-rules, with mac- or ip-adress… but i don’t find the correct settings…
Is it possible only with the mac-adress?
Or where do i find the “correct” ip i need to connect s2s??