# Setup proxy through GL-AXT1800

**URL:** <https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175>\
**Category:** Router\
**Created:** [September 20, 2022, 1:43am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175 "2022-09-20T01:43:30Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![lyelibi](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/l/b38774/32.png) [@lyelibi](https://forum.gl-inet.com/u/lyelibi)\
**Post date:** [September 20, 2022, 1:43am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/1 "2022-09-20T01:43:30Z")

</div>

Hello,  
I have created a proxy server on one computer which is in location A and I’ve travelled to location B where I tested the proxy server with firefox the following way: in firefox settings I find the network proxy settings and I enter the IP address and the port. It just works. (I made sure to setup port forwarding back at location A so the proxy server would work).

is there a way to configure my GL-AXT1800 to route all traffic to my proxy just like above?

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [September 20, 2022, 2:15am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/2 "2022-09-20T02:15:05Z")

</div>

Do you want to set up an HTTP proxy?  
You can install [Squid](https://openwrt.org/docs/guide-user/services/proxy/proxy.squid) or [Tinyproxy](https://openwrt.org/docs/guide-user/services/proxy/tinyproxy), then set it up in LuCI.

---

<div class="post-metadata">

**Author:** ![lyelibi](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/l/b38774/32.png) [@lyelibi](https://forum.gl-inet.com/u/lyelibi)\
**Post date:** [September 20, 2022, 8:53am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/3 "2022-09-20T08:53:41Z")

</div>

Thanks for the reply! So please help me get started as I’m fairly new to this. I had read about squid and tinyproxy, so I went into the applications menu, searched for tinyproxy and installed it. I also checked out LuCI (Advanced settings) but once I’m in there, where do I go to configure tinyproxy/squid?

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [September 20, 2022, 9:00am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/4 "2022-09-20T09:00:33Z")

</div>

![image](https://forum-static.gl-inet.com/original/2X/0/09ba9ddc7298325c0dec9363b17463ae978127a7.png)  
Services → Tinyproxy/Squid  
If they are hidden, you will need to log out in LuCI and log back in.

---

<div class="post-metadata">

**Author:** ![lyelibi](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/l/b38774/32.png) [@lyelibi](https://forum.gl-inet.com/u/lyelibi)\
**Post date:** [September 20, 2022, 9:25am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/5 "2022-09-20T09:25:59Z")

</div>

![7065360ec4300eada97b175cb4efdf29](https://forum-static.gl-inet.com/original/2X/5/563a2b91044fdd925fc36c299b4016e25544adc8.png)

Okay here is what I have after installing. I logged out and back in but still no services menu at the top? I’m using the AXT1800 is that a limitation of this model?

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [September 20, 2022, 9:31am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/6 "2022-09-20T09:31:11Z")

</div>

Do you have luci-app-tinyproxy installed?  
You can only configure the service on LuCI after installing luci-app-\*.

---

<div class="post-metadata">

**Author:** ![lyelibi](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/l/b38774/32.png) [@lyelibi](https://forum.gl-inet.com/u/lyelibi)\
**Post date:** [September 20, 2022, 10:07am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/7 "2022-09-20T10:07:36Z")

</div>

ha! so plugins configurable with the interface are the ones which start with luci-app-, okay I will remember that.

Can tinyproxy an Squid be used as a client side tools to connect to a proxy server? or are they essentially server creation tools? I’m mostly interested in routing all traffic toward a proxy server I have already setup at location A.

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [September 21, 2022, 1:49am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/8 "2022-09-21T01:49:43Z")

</div>

They may can help you:  
[How I set up Tinyproxy as a forward proxy and reverse proxy | by Isabel Costa | Medium](https://isabelcmdcosta.medium.com/how-i-set-up-tinyproxy-as-a-forward-proxy-and-reverse-proxy-2a5dc1ed64e4)  
[Setting up Explicit Squid Proxy - Alpine Linux](https://wiki.alpinelinux.org/wiki/Setting_up_Explicit_Squid_Proxy)

---

<div class="post-metadata">

**Author:** ![ghus](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/g/ebca7d/32.png) [@ghus](https://forum.gl-inet.com/u/ghus)\
**Post date:** [April 6, 2024, 5:20am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/9 "2024-04-06T05:20:03Z")

</div>

Reverse proxy does not seem to work. The Reverse proxy params are not supported. Not sure if I am missing something

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 11:37am UTC](https://forum.gl-inet.com/t/setup-proxy-through-gl-axt1800/24175/10 "2025-10-29T11:37:52Z")

</div>


