# Site 2 site setup internet not working

**URL:** <https://forum.gl-inet.com/t/site-2-site-setup-internet-not-working/67715>\
**Category:** VPN, DNS, Leaks\
**Created:** [March 19, 2026, 12:07pm UTC](https://forum.gl-inet.com/t/site-2-site-setup-internet-not-working/67715 "2026-03-19T12:07:13Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [March 23, 2026, 3:13am UTC](https://forum.gl-inet.com/t/site-2-site-setup-internet-not-working/67715/6 "2026-03-23T03:13:49Z")

</div>

That guide applies to devices running **v4.7** firmware.

In **v4.8** , the configuration is different.

The configuration is as follows:

- **On the WireGuard server side:**

1. Go to **Admin Panel → VPN → WireGuard Server** , and configure routing to the WireGuard client’s subnet.  
 ![image](https://forum-static.gl-inet.com/original/3X/5/6/5608256d011041ea5a1b6b290d5c34ed73174460.png)
2. Enable the " **Allow Remote Access to the LAN Subnet**" so the LAN devices from WireGuard **Client** side could access the LAN devices on WireGuard **Server** side.  
 ![image](https://forum-static.gl-inet.com/original/3X/8/b/8b56ef1545fce182743523f4c2996d9e288d8c74.png)

- **On the WireGuard client side:**

1. Go to **Admin Panel → VPN → VPN Dashboard** , switch to **Policy Mode** , and configure it so that only traffic destined for the remote subnet goes through the VPN.  

2. Enable the " **Allow Remote Access to the LAN Subnet**" so the LAN devices from WireGuard **Server** side could access the LAN devices on WireGuard **Client** side.

---

_[View the full topic](https://forum.gl-inet.com/t/site-2-site-setup-internet-not-working/67715)._