# Slate 7 travel route w/ tailscale. Can't access my devices on my tailnet

**URL:** <https://forum.gl-inet.com/t/slate-7-travel-route-w-tailscale-cant-access-my-devices-on-my-tailnet/66270>\
**Category:** Router\
**Created:** [December 26, 2025, 6:35am UTC](https://forum.gl-inet.com/t/slate-7-travel-route-w-tailscale-cant-access-my-devices-on-my-tailnet/66270 "2025-12-26T06:35:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [December 26, 2025, 7:55am UTC](https://forum.gl-inet.com/t/slate-7-travel-route-w-tailscale-cant-access-my-devices-on-my-tailnet/66270/2 "2025-12-26T07:55:38Z")

</div>

Hi

Could you please confirm whether the routes for the Slate 7 have been approved in the Tailscale admin panel?

 ![image](https://forum-static.gl-inet.com/original/3X/1/e/1e8500687b16e5ba77bea4ddb6fb7b597c9464c0.png)

If they are approved but the device connected to the Slate 7 still cannot communicate with other Tailscale nodes, please help us check the following:

1. The firmware version currently running on the Slate 7
2. Screenshots of **GL UI → Applications → Tailscale** and the **Tailscale admin panel** , so we can review the configuration
3. A route trace to help identify where the traffic is being blocked:

```bash
# Windows (CMD)
tracert <tailscale_ip>

# macOS / Linux
traceroute <tailscale_ip>

```

Additionally, the Slate 7 currently has an issue affecting download speeds. Please refer to this temporary workaround for resolution.

> [@Extremely Slow Speed on Slate 7](https://forum.gl-inet.com/t/extremely-slow-speed-on-slate-7/65627/17):
>
> Thank you for your patience. We’ve identified the likely cause and are validating it now, and we’re also planning a firmware update to fully resolve the issue. As a temporary workaround, please SSH into the router and run: ethtool -K br-lan tso off ethtool -K eth0 tso off ethtool -K eth1 tso off ethtool -K wlan0 tso off ethtool -K wlan1 tso off If the issue is resolved, you can make this persistent by adding the same commands to /etc/rc.local before exit 0, then rebooting the router to confi…

---

_[View the full topic](https://forum.gl-inet.com/t/slate-7-travel-route-w-tailscale-cant-access-my-devices-on-my-tailnet/66270)._
