# Slate AX GL-AXT1800 - Initial Feedback of Router and Power Supply

**URL:** <https://forum.gl-inet.com/t/slate-ax-gl-axt1800-initial-feedback-of-router-and-power-supply/22402>\
**Category:** Router\
**Created:** [June 20, 2022, 6:32pm UTC](https://forum.gl-inet.com/t/slate-ax-gl-axt1800-initial-feedback-of-router-and-power-supply/22402 "2022-06-20T18:32:58Z")\
**Posts on this page:** 2\
**Page:** 3

<div class="post-metadata">

**Author:** ![HDFactory](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/h/c57346/32.png) [@HDFactory](https://forum.gl-inet.com/u/HDFactory)\
**Post date:** [August 28, 2022, 3:10pm UTC](https://forum.gl-inet.com/t/slate-ax-gl-axt1800-initial-feedback-of-router-and-power-supply/22402/41 "2022-08-28T15:10:21Z")

</div>

I suggested the most correct option. Do you understand the difference: set the RPM manually or change the target temperature of the script built by the manufacturer to control the fan?

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:18am UTC](https://forum.gl-inet.com/t/slate-ax-gl-axt1800-initial-feedback-of-router-and-power-supply/22402/42 "2025-10-29T04:18:36Z")

</div>



[Previous page](https://forum.gl-inet.com/t/slate-ax-gl-axt1800-initial-feedback-of-router-and-power-supply/22402.md?page=2)