I’m just testing my new SpitxAX GL-X3000, everything seems working good, and I’m impressed with the 5G and also 3G and 4G reception.
Anyway, I’m disappointed with the PPPoE performance, I used it around 1 hour and the max download speed I had was 150 Mbps, with my GL Flint, before and after this test I was going more than 600 Mbps.
I hope that this bad speed performance could be solved by software soon!
I also asked here in the forum if there was any mistake, this is in the other thread:
“but I suspect that this is not the 4.3 but only the 4.0.
my Firmware type changed from release30300 to release10300.
I updated because the snapshot day was newest.”
hope this helps, let me know if you need other information.
regards
Piero
I have tested the PPPOE function through Xinertel bigdao220.But it is OK.
In confirming a few things:
1, Do you have firewall, dns, vpn services enabled?
2, Please update the firmware to help verify this issue: GL.iNet download center
Hi,
My provider is digiweb, in Ireland.
I can confirm that I have the latest firmware available in your web site, and also that I don’t have any firewall or VPN service enabled.
I do have manual DNS (same configuration of the Flint) as the following:
Hi,
thanks to Lizh for the help and support.
the issue was that my 5G network had the bandwidth set to 20 MHz.
I changed to 80 MHz and the performance are now great.
This parameter was changed to 20 after the upgrade, I did not change, just check the default value if you have similar issue.
We can close this thread.
cheers
Piero