# Still on 4.5.6, what should I update to (Flint 2 with lots of settings)

**URL:** <https://forum.gl-inet.com/t/still-on-4-5-6-what-should-i-update-to-flint-2-with-lots-of-settings/50945>\
**Category:** Router\
**Created:** [November 25, 2024, 3:43pm UTC](https://forum.gl-inet.com/t/still-on-4-5-6-what-should-i-update-to-flint-2-with-lots-of-settings/50945 "2024-11-25T15:43:40Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Josechu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/j/eb8c5e/32.png) [@Josechu](https://forum.gl-inet.com/u/Josechu)\
**Post date:** [November 27, 2024, 2:24pm UTC](https://forum.gl-inet.com/t/still-on-4-5-6-what-should-i-update-to-flint-2-with-lots-of-settings/50945/6 "2024-11-27T14:24:46Z")

</div>

> [@bruce](#):
>
> As long as it is upgraded normally and "keep setting" is checked, the previous configuration should be there after the upgrade, including Reservations and Port Forwarding.

One question about this, does it also apply to configurations done via luci or the cli? I have some configurations applied manually for IPTV... with specific vlan tag for a subinterface... with its own dhcp options... and also packages installed that were needed and has config added via CLI (as this package: [kmod-ipt-nathelper-rtsp missing](https://forum.gl-inet.com/t/rtsp-passthrough-kmod-ipt-nathelper-rtsp-missing/37149))

---

_[View the full topic](https://forum.gl-inet.com/t/still-on-4-5-6-what-should-i-update-to-flint-2-with-lots-of-settings/50945)._