# Tailscale: "Allow Remote Access WAN" not Advertising Exit Node **URL:** \ **Category:** VPN, DNS, Leaks\ **Created:** [July 1, 2025, 1:59am UTC](https://forum.gl-inet.com/t/tailscale-allow-remote-access-wan-not-advertising-exit-node/60520 "2025-07-01T01:59:50Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\ **Post date:** [July 1, 2025, 10:45am UTC](https://forum.gl-inet.com/t/tailscale-allow-remote-access-wan-not-advertising-exit-node/60520/2 "2025-07-01T10:45:47Z")
Hello, Do you want to the Flint2 host the exit node of Tailscale? Sorry but the GL GUI does not support this feature. Please refer to this thread to manually configure: > [@Brume 2 as a Tailscale exit node](https://forum.gl-inet.com/t/brume-2-as-a-tailscale-exit-node/27663/7): > > Thanks @Dwagie! However I’m a linux/shell noob, so I got somewhat confused by the instructions. But finally I figured it out. Here are some more detailed instructions for my fellow noobs: SSH into the Brume 2 by running ssh root@[ip or hostname of Brume] (e.g. ssh root@192.168.8.1 if on the same local network with the default subnet). You can also use its tailnet IP or hostname assuming you’ve already connected it to your Tailscale account. Enter your Brume 2 password and hit enter/return E… --- _[View the full topic](https://forum.gl-inet.com/t/tailscale-allow-remote-access-wan-not-advertising-exit-node/60520)._