Temperature ML-6000/Flint 2

M.B · 2024-07-18T14:40:06.691Z

2024-07-18 16_37_39-GL-MT6000 - LuCI936×678 6.18 KB

Hello guys. Is this a normal temperature for Flint2? Also not a lot of traffic when i have made the screenshot.

Renato · 2024-07-18T15:42:54.626Z

55°C is quite good and normal for a device whitout any fan...

M.B · 2024-07-18T18:10:53.676Z

Thanks for the info. normally i am used with 30 degrees temps in my devices that why i was a bit curious to ask

admon · 2024-07-18T18:13:29.995Z

If you disable Wi-Fi the temperature will be much better

M.B · 2024-07-18T18:24:36.496Z

That will be the best

logi · 2024-07-18T18:38:17.013Z

How are you getting this information? Is it an add-on? Thank you

M.B · 2024-07-18T19:07:11.545Z

Yes . luci-app-statistics first time and after the plugins : collectd-mod-sensors

logi · 2024-07-18T19:35:50.113Z

All of them are plugins? You install them through GLiNet or LuCI interface? Thanks

M.B · 2024-07-18T19:46:55.119Z

GliNet but you cannot see the graphs on GLi. You must go to Luci

logi · 2024-07-18T20:02:52.953Z

Thank you, so 3 plugins?

luci-app-statistics
collectd
mod-sensors

M.B · 2024-07-18T20:14:08.351Z

yes and login to luci and you will see a new menu : Statistics

logi · 2024-07-18T20:26:04.217Z

Thank you very much,

M.B · 2024-07-18T20:28:03.762Z

Your welcome.Hope its working

Yoshi_kill · 2025-03-11T16:14:07.653Z

Hey, can you tell how exactly you add temp monitor? I try use it but cant setup it correctly, its don't show in my menu.

Summary

Screenshot 2025-03-11 at 18-13-00 GL-MT6000 - Setup - LuCI786×421 6.31 KB

Screenshot 2025-03-11 at 18-12-47 GL-MT6000 - Setup - LuCI990×485 9.75 KB

Screenshot 2025-03-11 at 18-12-29 GL-MT6000 - Graphs - LuCI958×278 6.19 KB

TomKatt · 2025-03-11T16:25:49.814Z

logi:

luci-app-statistics
collectd
mod-sensors

I had to install collectd-mod-thermal in order to get the Thermal tab to show up, but I also cannot get the same graphs as the OP shows... I am also curious about this.

Yoshi_kill · 2025-03-11T20:13:30.121Z

Thanks! It's work. Why he don't tell about that thermald package.

Don't show
You about this? Or how you show other screen in my thread?

Screenshot_20250311-2211031080×2400 168 KB

Tater · 2025-03-28T06:52:14.121Z

I don't think OP is running the GL.Inet version of OpenWRT, those sensors don't appear in the /sys/class/thermal tree nor in /sys/class/ieee80211/phy on my Flint2 running 4.7.4 (OpenWrt 21.02-SNAPSHOT r15812+1083-46b6ee7ffc)