Tethering and Cellular

Hi it’s my second product, first GL-1300 Works fine (without upgrade). Today I switch on my new GL-AXT1800, first upgrade soft then config WireGuard and AdGuard…
It’s time to test SAMBA - Works fine.
Now I have tested tethering and Cellular, first I click Connect and wait … nothing (not conneced), next I plug my Usb modem MF833U1 (it’s Work with GL-1300) Just blinking but nothing Connect.
Main site with router don’t show that tethering or celluar is connected.

What i wrong with my GL-AXT1800 ?

  • Hostname

GL-AXT1800

  • Model. - GL Technologies, Inc. AXT1800

  • Architecture. - ARMv7 Processor rev 4 (v7l)

  • OpenWrt Version. - OpenWrt 21.02-SNAPSHOT r16399+165-c67509efd7

  • Kernel Version. - 4.4.60

Hi,

could you please attach your logfiles?

Thank you for your response of course I have to admit I didn’t think of it right away…

System Log

Tue Jan 23 13:55:36 2024 daemon.err nmbd[10001]:
Tue Jan 23 13:55:36 2024 daemon.err nmbd[10001]:   *****
Tue Jan 23 13:57:18 2024 kern.info kernel: [  428.004584] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
Tue Jan 23 13:57:18 2024 kern.info kernel: [  428.175784] usb 1-1: reset high-speed USB device number 5 using xhci-hcd
Tue Jan 23 13:57:18 2024 kern.info kernel: [  428.345922] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
Tue Jan 23 13:57:18 2024 kern.err kernel: [  428.548796] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
Tue Jan 23 13:57:18 2024 kern.err kernel: [  428.548841] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
Tue Jan 23 13:57:28 2024 kern.info kernel: [  438.244585] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
Tue Jan 23 13:57:28 2024 kern.info kernel: [  438.415780] usb 1-1: reset high-speed USB device number 5 using xhci-hcd
Tue Jan 23 13:57:28 2024 kern.err kernel: [  438.534447] usb 1-1: device descriptor read/64, error -71
Tue Jan 23 13:57:29 2024 kern.info kernel: [  438.810312] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
Tue Jan 23 13:57:29 2024 kern.err kernel: [  439.016412] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
Tue Jan 23 13:57:29 2024 kern.err kernel: [  439.016457] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
Tue Jan 23 13:59:20 2024 kern.info kernel: [  550.229968] usb 1-1: USB disconnect, device number 5
Tue Jan 23 13:59:20 2024 kern.info kernel: [  550.230092] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
Tue Jan 23 13:59:23 2024 daemon.err nmbd[10001]: [2024/01/23 13:59:23.931618,  0] ../../source3/nmbd/nmbd.c:60(terminate)
Tue Jan 23 13:59:23 2024 daemon.err nmbd[10001]:   Got SIGTERM: going down...
Tue Jan 23 13:59:24 2024 daemon.err nmbd[12970]: [2024/01/23 13:59:24.338818,  0] ../../lib/util/become_daemon.c:136(daemon_ready)
Tue Jan 23 13:59:24 2024 daemon.err nmbd[12970]:   daemon_ready: daemon 'nmbd' finished starting up and ready to serve connections
Tue Jan 23 13:59:24 2024 daemon.err smbd[12969]: [2024/01/23 13:59:24.416114,  0] ../../lib/util/become_daemon.c:136(daemon_ready)
Tue Jan 23 13:59:24 2024 daemon.err smbd[12969]:   daemon_ready: daemon 'smbd' finished starting up and ready to serve connections
Tue Jan 23 13:59:40 2024 kern.info kernel: [  570.184434] usb 1-1: new high-speed USB device number 6 using xhci-hcd
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.679][3] usbmuxd v1.1.1 starting up
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.679][3] Using libusb 1.0.22
Tue Jan 23 13:59:40 2024 kern.info kernel: [  570.514308] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.723][3] Initialization complete
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.724][3] Enabled exit on SIGUSR1 if no devices are attached. Start a new instance with "--exit" to trigger.
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.724][3] Connecting to new device on location 0x10006 as ID 1
Tue Jan 23 13:59:40 2024 daemon.err usbmuxd[13253]: [13:59:40.724][3] Connected to v2.0 device 1 on location 0x10006 with serial number 00008030-001555EC1447802E
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]: [2024/01/23 13:59:56.763518,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]:   *****
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]:
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]:   Samba name server GL-AXT1800 is now a local master browser for workgroup WORKGROUP on subnet 192.168.8.1
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]:
Tue Jan 23 13:59:56 2024 daemon.err nmbd[12970]:   *****
Tue Jan 23 14:00:20 2024 daemon.notice netifd: Interface 'tethering' is enabled
Tue Jan 23 14:00:20 2024 kern.info kernel: [  610.455403] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
Tue Jan 23 14:00:20 2024 kern.info kernel: [  610.458831] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
Tue Jan 23 14:00:47 2024 daemon.notice netifd: Interface 'tethering' is disabled
Tue Jan 23 14:00:50 2024 daemon.notice netifd: Interface 'tethering' is enabled
Tue Jan 23 14:00:50 2024 kern.info kernel: [  640.213591] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
Tue Jan 23 14:02:55 2024 daemon.notice netifd: Interface 'tethering' is disabled

Kernel log

   42.492606] br-lan: port 4(wlan0) entered forwarding state
[   42.498341] br-lan: port 4(wlan0) entered forwarding state
[   50.524413] br-lan: port 4(wlan0) entered forwarding state
[  269.584429] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[  269.727034] usb-storage 1-1:1.0: USB Mass Storage device detected
[  269.731499] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
[  269.732186] scsi host0: usb-storage 1-1:1.0
[  272.855100] usb 1-1: USB disconnect, device number 2
[  273.294432] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[  273.673504] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  273.674238] cdc_ether 1-1:1.0 eth3: kevent 12 may have been dropped
[  273.674369] usb-storage 1-1:1.2: USB Mass Storage device detected
[  273.674762] scsi host1: usb-storage 1-1:1.2
[  273.679791] cdc_ether 1-1:1.0 eth3: kevent 11 may have been dropped
[  274.675236] scsi 1:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.3  PQ: 0 ANSI: 2
[  274.675667] scsi 1:0:0:1: Direct-Access     DEMO     MMC Storage      2.3  PQ: 0 ANSI: 2
[  274.685046] sd 1:0:0:1: [sda] Attached SCSI removable disk
[  278.535187] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  278.535230] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  279.389732] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  279.567797] usb 1-1: reset high-speed USB device number 3 using xhci-hcd
[  279.736643] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  279.737766] cdc_ether 1-1:1.0 eth3: kevent 12 may have been dropped
[  279.796397] cdc_ether 1-1:1.0 eth3: kevent 12 may have been dropped
[  280.040985] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  280.041029] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  285.284597] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  285.519782] usb 1-1: reset high-speed USB device number 3 using xhci-hcd
[  285.688348] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  285.689198] cdc_ether 1-1:1.0 eth3: kevent 12 may have been dropped
[  285.910461] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  285.910507] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  289.124596] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  289.295781] usb 1-1: reset high-speed USB device number 3 using xhci-hcd
[  289.464252] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  289.465091] cdc_ether 1-1:1.0 eth3: kevent 12 may have been dropped
[  289.715903] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  289.715947] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  299.977841] usb 1-1: USB disconnect, device number 3
[  299.977971] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  310.264430] usb 1-1: new high-speed USB device number 4 using xhci-hcd
[  310.407018] usb-storage 1-1:1.0: USB Mass Storage device detected
[  310.407403] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
[  310.412166] scsi host2: usb-storage 1-1:1.0
[  313.540352] usb 1-1: USB disconnect, device number 4
[  313.974431] usb 1-1: new high-speed USB device number 5 using xhci-hcd
[  314.436747] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  314.437592] usb-storage 1-1:1.2: USB Mass Storage device detected
[  314.447075] scsi host3: usb-storage 1-1:1.2
[  315.445124] scsi 3:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.3  PQ: 0 ANSI: 2
[  315.445410] scsi 3:0:0:1: Direct-Access     DEMO     MMC Storage      2.3  PQ: 0 ANSI: 2
[  315.455106] sd 3:0:0:1: [sda] Attached SCSI removable disk
[  316.306016] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  316.306061] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  321.444576] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  321.615786] usb 1-1: reset high-speed USB device number 5 using xhci-hcd
[  321.785120] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  321.986156] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  321.986201] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  428.004584] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  428.175784] usb 1-1: reset high-speed USB device number 5 using xhci-hcd
[  428.345922] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  428.548796] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  428.548841] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  438.244585] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  438.415780] usb 1-1: reset high-speed USB device number 5 using xhci-hcd
[  438.534447] usb 1-1: device descriptor read/64, error -71
[  438.810312] cdc_ether 1-1:1.0 eth3: register 'cdc_ether' at usb-xhci-hcd.0.auto-1, CDC Ethernet Device, 34:4b:50:00:00:00
[  439.016412] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  439.016457] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16
[  550.229968] usb 1-1: USB disconnect, device number 5
[  550.230092] cdc_ether 1-1:1.0 eth3: unregister 'cdc_ether' usb-xhci-hcd.0.auto-1, CDC Ethernet Device
[  570.184434] usb 1-1: new high-speed USB device number 6 using xhci-hcd
[  570.514308] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
[  610.455403] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[  610.458831] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[  640.213591] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready

Full logs I put info files → system_log
kernel_log