Time period for WPA3. Better WPA3 beta, than 14 years old and broken PWA2

wellnw · 2020-04-30T09:34:30.422Z

@Henry_Bruns
You can download the firmware of the AR750S 19.07 version from the following link, but please note that uboot upgrade is currently supported,
https://dl.gl-inet.com/firmware/ar750s/snapshots/ar750s_19.07/

image762×144 11.3 KB

Note:

Upgrade from openwrt-18.06 version to openwrt-19.07 version, currently only support uboot upgrade（openwrt-ar750s-3.200.img）
upgrade method refer to the following link:Debrick via Uboot - GL.iNet Docs
By default, WPA2/WPA3 mixed encryption is used. During the self-test, some Android devices failed to connect.
If the connection fails, you can modify it on the WIRELESS.

typhoe · 2020-05-01T12:39:15.871Z

Hi,

quick test.

old Android 9 Sony phone : connect correctly in wpa2 psk (5GHz)
linux notebook : connect correctly in wpa3 (5GHz also)

No access yet to luci web interface?
No option in gl menu and it is redirected when trying http://192.168.8.1/cgi-bin/luci/

Thanks!

alzhao · 2020-05-01T16:53:48.612Z

The redirection may be just a browser issue?

typhoe · 2020-05-01T21:37:06.234Z

I don’t think.
I tried to force refresh and even tried the url directly in “incognito mode”.

rp201rp · 2020-05-02T01:15:25.133Z

I believe ar750s uses ath10 wireless
does this support 802.11w Management Frame Protection ?

alzhao · 2020-05-02T01:47:36.009Z

Can you just type http://192.168.8.1/#
Add # at the end

Henry_Bruns · 2020-05-03T07:55:03.617Z

wellnw:

By default, WPA2/WPA3 mixed encryption is used. During the self-test, some Android devices failed to connect.
If the connection fails, you can modify it on the WIRELESS.

A friend has been using the firmware on two AR750S for a few days. He’s been up and running so far. He probably uses a WLAN for non WPA3 devices and a WLAN for WPA3 only devices. It looks like this avoids possible problems with not fully wpa3 compliant client devices.

Its looks like, WPA3 is supported on this time by:

Windows 10, Linux Kernel 5.1 by self and 4.19 by installed Kernel driver for used WPA3 device, Androide 10 and Openwrt 19.07 RC2. I dont know about Apple OS.
https://en.wikipedia.org/wiki/IEEE_802.11ax#Silicon

I have not tested the new WPA3 firmware because I only have smaler ar750 and ar300.

typhoe · 2020-05-04T15:29:23.017Z

That’s simply the url to get the gl-inet web management interface.

I’m asking about the openWRT one !

There’s a redirection on the usual openwrt url (and anything else in fact):
http://192.168.8.1/cgi-bin/luci/ → http://192.168.8.1/#

curl http://192.168.8.1/cgi-bin/luci/
<html>

<head>
    <meta http-equiv='refresh' content='1; url=/#' />
</head>

<body>
</body>

rp201rp · 2020-05-05T04:24:11.977Z

Henry_Bruns:

I have not tested the new WPA3 firmware because I only have smaler ar750 and ar300.

I do extroot on my 750. have 19.07.2 clean loaded and use wpa3 no problem. also have freeradius3 and testing with wpa3_peap loaded.

rp201rp · 2020-05-05T07:08:41.364Z

Henry_Bruns:

He probably uses a WLAN for non WPA3 devices and a WLAN for WPA3 only devices. It looks like this avoids possible problems with not fully wpa3 compliant client devices

I have tested wpa2/wpa3 mixed mode sae and eap (enterprise) and have seen wpa2 working and wpa3 clients stepping down to wpa2 making it useless. What I have also read is to never have two ap’s on the same radio with different security schemes which I tested and found it not to be necessary but actually worked fine. please don’t take my word for it but please test yourself incase my testing was in correct cause i really diddn’t believe it myself. maybe a new enhancement in 19.07.x? Note no mixing enterpise because that defaulted to enterprise

satadru · 2020-05-16T14:52:47.641Z

I’m trying to use IPv6 with this ar750s-3.200 firmware. I can’t seem to get any IPv6 addresses on my client machines on the LAN.

I have run this first to enable IPv6:

uci set glipv6.globals.enabled=1 && uci commit

But I can’t get IPv6 addresses to show up on my LAN. Does anyone have a working set of /etc/config/network, /etc/config/dhcp, and /etc/config/firewall to let this work?

(Not currently using a VPN, so not worried about information leakage.)

alzhao · 2020-05-18T09:11:44.328Z

If you do not mind I ask, did you reboot the router after you do that?

Pls also show /etc/config/network

satadru · 2020-05-18T14:49:24.801Z

I ended up getting it working by just putting this behind another router and setting it to be a dumb AP. (no firewall, bridged WAN, LAN, & Wifi).

WPA3 is working just fine though. I’ve noticed that other people are having issues with IPv6 and some routers with 19.07.x I wonder if that is an issue here?

satadru · 2020-05-18T14:51:15.147Z

(And yes, I did reboot the router.)

Henry_Bruns · 2020-05-20T10:48:37.122Z

Open WRTR 19.07.3/ now available:

OpenWrt 19.07.3 service release - Installing and Using OpenWrt - OpenWrt Forum
[OpenWrt Wiki] OpenWrt 19.07.3 - Service Release - 20 May 2020
Index of /releases/19.07.3/

“Upgrading to OpenWrt 19.07.3
Upgrading from previous OpenWrt 19.07 versions is straightforward thanks to the sysupgrade utility: sysupgrade from web interface or sysupgrade from command-line.”
Source: [OpenWrt Wiki] OpenWrt 19.07.3 - Service Release - 20 May 2020

It may be that some of the a little more security conscious users are ready for a test of a more secure gl firmware…

Henry_Bruns · 2020-07-26T23:55:41.272Z

Henry_Bruns:

Its looks like, WPA3 is supported on this time by:

Windows 10, Linux Kernel 5.1 by self and 4.19 by installed Kernel driver for used WPA3 device, Androide 10 and Openwrt 19.07 RC2. I dont know about Apple OS.

https://en.wikipedia.org/wiki/IEEE_802.11ax#Silicon

Apple is supporting WPA3 since iOS Version 13

sfx2000 · 2020-07-26T23:59:10.518Z

There are still issues to be resolved with WPA2/WPA3 interoperability…

It’s mostly on older devices that do support WPA2, but the new epigrams can/will cause issues here on the client side…

Henry_Bruns · 2020-07-27T00:12:32.057Z

One other vendor of WiFi4 and WiFi5 router, which use open wrt 19.07.x firmware and support mixed mode forWPA2/3 Personal, reporting its need by some clients to reconnect once (setup the connection to the client new by typing the password). I have the same experience with WiFi5 router which supporting mixed WPA2/3 to WiFi6 client devices. No problems, after first new logon by typing wifi password.

sfx2000 · 2020-07-27T00:25:05.598Z

Don’t confuse Wife 4/5/6 with WPA2/3 please…

Patches applied on AR150 on openwrt master, which is WiFi4, can support WPA3

sfx

Henry_Bruns · 2020-07-27T00:27:25.418Z

sfx2000:

Don’t confuse Wife 4/5/6 with WPA2/3 please…

I dont confuse this. I’ve changed the wording a little bit to make it more clear.