Tor Not Working

ponzi1 · 2020-10-23T10:35:23.264Z

@alzhao You did receive my reply? I have internet. Then I click “Apply” to Tor. Then I do not have any internet/Tor.

alzhao · 2020-10-23T13:39:12.334Z

Yes. I need to set up my AR300M and try.

ponzi1 · 2020-10-26T05:05:13.024Z

@alzhao OK thank you. I try a few ideas but nothing is work yet. But also I can not access GL UI because of other issue. Password Stop Working After Upgrade GL UI - #6 by alzhao

ponzi1 · 2020-10-27T04:50:36.710Z

@alzhao also v 3.105 has v 18.04 OpenWRT. This is correct?

alzhao · 2020-10-27T04:55:35.091Z

ponzi1:

also v 3.105 has v 18.04 OpenWRT. This is correct

18.06 no major update in openwrt version if not necessary.

ponzi1 · 2020-10-27T05:27:26.777Z

Okay. I thought it should be one possible reason Tor not working (old Tor) but maybe is something else. Is really a problem I wish to solve.

ponzi1 · 2020-10-28T02:13:17.369Z

@alzhao

Is one week now. Please, there is something I can do to fix this problem?

alzhao · 2020-10-28T05:27:32.447Z

ponzi1:

Is one week now. Please, there is something I can do to fix this problem?

I will report back today.

alzhao · 2020-10-28T09:01:25.250Z

I do flashed 3.105 and Tor is working OK.
I am using cable for Internet.

ponzi1 · 2020-10-29T00:05:35.376Z

@alzhao

Very good for you but this is not true for me. So again I ask, what you think I should test to give you informations to fix? (I am also using cable for internet and I talk before about nand/nor.)

alzhao · 2020-10-29T05:47:34.513Z

Several things to try:

You try a different ISP
You try an old firmware
Let me check remotely and find a way for further analysis.

Pls also tell me your location.

ponzi1 · 2020-10-29T06:53:43.160Z

@alzhao

You try a different ISP

I have other Tor connection with this ISP. Can not be ISP. Problem is GL UI does freeze, can not access if do Tor.

You try an old firmware

What you recommend, what is having Tor? https://dl.gl-inet.com/firmware/ar300m/nand/testing/

Let me check remotely and find a way for further analysis.

What is this mean?

Pls also tell me your location.

Why?

ponzi1 · 2020-10-29T07:08:54.520Z

alzhao:

I do flashed 3.105

Exact filename please?

alzhao · 2020-10-29T09:33:43.938Z

ponzi1:

Exact filename please?

3.105-1014
https://dl.gl-inet.com/firmware/ar300m/nand/testing/

alzhao · 2020-10-29T09:34:17.878Z

ponzi1:

What is this mean?

Pls also tell me your location.

Why?

Need to check remotely using anydesk or teamviewer to understand the problem.

ponzi1 · 2020-10-29T09:42:23.945Z

Need to check remotely using anydesk or teamviewer to understand the problem.

Oh no, never allow remote access to my PC. Please, tell me files to check and ideas to try. I use same file you use. I check sum (c26…). I upload. It say success. I enter GL UI. I go Tor. I click Apply. Can not access GL UI. I asking for troubleshooting, not for someone to enter my PC.

3.105-1014
https://dl.gl-inet.com/firmware/ar300m/nand/testing/

Exists two files have this name. Exact filename please?

alzhao · 2020-10-29T11:01:25.306Z

ponzi1:

Exists two files have this name. Exact filename please?

It is the same firmware, one used for uboot, one used to upgrade in openwrt.

ponzi1 · 2020-10-29T20:44:53.124Z

Okay so what I can test?

alzhao · 2020-10-30T07:27:14.455Z

Flash a firmware without reserving settings, then use a private browser tab to try again.

ponzi1 · 2020-11-02T05:59:12.024Z

@alzhao

Very strange things.

I do not touch router for one week.

I boot to router and it have firmwares 2.? !! Why can this happen? I do not upload old firmwares.

I download new firmwares from GL.iNet download center.

I upload the tar file. It tell me not valid. Why is this? In past, I was flashing .tar.

Now I try .img. Accepts file but it tell me that file is too big (15.75) becuase only available 15.63.

So many strange things. Please help me understand. I never having problems before recent when I want upgrade 3.105.