Using MT1300 with QUECTEL EM160R-GL

[robotluo]

@i7bar

showed that the modem is using a different bus - ‘2-1’
So, I modified glconfig and changed modem.bus to ‘2-1’ and now GL GUI detects the modem:

This should be a BUG, I noticed that when I plug in a USB3.0 device, the bus is recognized as 2-1, but when I plug in a USB2.0 device, the bus is recognized as 1-1, which will be fixed in version 3.211.

@i7bar

What Gl-inet GUI really needs is the embedded terminal alllowing uses to send mulitiple AT commands to the modem, see/save the history /list of previously called AT commands. The currently existing “one line AT command” approach (in my view) is far from enough, since proper management of LTE modem normally requires a lot of manually sent AT commands (aggregation/band/tower cell selection/lock, reading signal and temperature info and many other things)

If you need to execute more than one command, you can write your own script to implement the command as follows, remember to replace your bus name

root@GL-MT1300:~# gl_modem -B 1-1 AT /dev/ttyUSB2 ATI
ATI
Quectel
EP06
Revision: EP06ELAR03A06M4G

OK
root@GL-MT1300:~#