V3.0 beta firmware for MiFi is open for public testing

flysail · 2018-08-29T03:41:18.816Z

Hi, I would like to try this testing.
But, Is there any detail about this version?
Whether this release base on openwrt 18?

alzhao · 2018-08-29T07:50:08.077Z

root@GL-MIFI:~# cat /etc/openwrt_version
r7258-5eb055306f
root@GL-MIFI:~# cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='18.06.1'
DISTRIB_REVISION='r7258-5eb055306f'
DISTRIB_TARGET='ar71xx/generic'
DISTRIB_ARCH='mips_24kc'
DISTRIB_DESCRIPTION='OpenWrt 18.06.1 r7258-5eb055306f'
DISTRIB_TAINTS=''

shesk · 2018-08-31T18:12:49.763Z

Updating GL-MT300N-V2 to the 3.0 firmware seems to have bricked my device. I can no longer connect to it via WiFi or LAN port. Any ideas, suggestions or help would be greatly appreciated. Because I can’t connect, I have no idea how to revert back to the stable 2.26 release.

vitas · 2018-08-31T20:46:48.709Z

See if this link helps connect to the advanced menu directly:
http://192.168.8.1/cgi-bin/luci/

Sincerely,
Vitas Povilaitis

shesk · 2018-09-01T07:01:04.366Z

I’ll give it a shot. Not sure it will work since my laptop continually says “Connecting…” And never gets an IP. Also, the gl-mt300 no longer broadcasts an SSID, so I’m trying to connect via LAN.

metteus · 2018-09-02T09:15:23.953Z

Model: GL-AR300M lite
Interface GUI: Advanced Mode
Problem: Missing top menù about software config like adBlock, Shadowsocks, etc…(Present in 2.27 firmware version)

EDIT solved: just install luci-app-adblock

panpan · 2018-09-14T05:40:57.299Z

flysail · 2018-11-05T10:29:28.703Z

I updated fireware to 3.006. It is beauty UI than 2.271.
But the 4g/3g not stable, sometimes i cann`t connect to internet while i can receive and send sms. There was 10k and 65k receive and send data count.

I cann`t find the reason, maybe cause by shadowsocksr.

So back to 2.271 now.

alzhao · 2018-11-05T13:19:25.453Z

How is the signal indicator showing? Is it 3G or 4G?

flysail · 2018-11-05T16:42:10.704Z

It is 4G.
At the first page, the 4g moude is gray color, not the green color like connected to internet.

flysail · 2018-11-05T16:43:26.224Z

But the 4g led is on flash, mean on used.

flysail · 2018-11-05T16:45:23.361Z

the 2.271 page is like this now.

311972×364 159 KB

panpan · 2018-11-06T01:56:05.027Z

What browser did you use? Is it IE?

flysail · 2018-11-06T03:10:23.663Z

chrome 70.
Show this page at 2.271.
Update to 3.006 fireware and back to 2.271.

alzhao · 2018-11-06T04:40:18.268Z

press shift+F5 to clear browser cache

flysail · 2018-11-09T14:49:46.788Z

hi
i see the lasted test version is gl-mifi-3.006-1109.bin.
where can i get the detail difference with the version gl-mifi-3.006-1101.bin

Johnex · 2018-11-10T20:41:12.161Z

Only the stable firmwares have change logs.

flysail · 2018-11-27T03:56:30.144Z

I am not sure is this a problem that when my cell phone connected to MIFi 's wifi on 3.0 fireware, there no ip6 address.
But it was had a ip6 ip address on 2.7 .

alzhao · 2018-11-28T08:01:55.897Z

So do you need ip6 or not?

flysail · 2018-11-29T14:31:46.466Z

yes, it must be useful.