V3.01, How to configure SSH, especely disable SSH?

Henry_Bruns · 2019-01-13T00:19:49.565Z

V3.01, How to configure SSH, especely disable SSH ?

They are a How To for this ?

I dont use SSH and depend on this, I like to be shure, its realy disabled.

alzhao · 2019-01-13T02:18:59.110Z

You can disable dropper in Luci, or using command

/etc/init.d/dropbear disable
/etc/init.d/dropbear stop

Henry_Bruns · 2019-01-13T11:35:03.411Z

alzhao:

You can disable dropper in Luci, or using comman

Luci sounds like advanced admin menue
I have found dropbear on: http://192.168.8.1/cgi-bin/luci/admin/status/processes a its looks like its not possible to deaktivate this by “Terminate” or “Kill” button.

How to deactivate “dropebear” by which menue item or button ?

glitch · 2019-01-13T14:22:21.435Z

GO to Luci (advanced settings) and do it there.

kyson-lok · 2019-01-16T03:19:28.238Z

You can do it in Luci.

image1223×590 49.4 KB

Henry_Bruns · 2019-01-16T23:47:22.851Z

That’s good looking. Now I have disabled the not by me used ssh by “Enable/Disable” button on http://192.168.8.1/cgi-bin/luci/admin/system/startup
Thanks.

Henry_Bruns · 2019-05-30T17:09:25.365Z

The Dropebear Buttun on follow screenshot is labeled as “Enabled”
https://forum-static.gl-inet.com/original/2X/d/de40af7122116a392d73b7ba8d74d41a102eb052.png

*** But was dos it mean?** Describes the button labeled “Enabled”, the current status, or the status which you can select and which becomes active after the selection?

I guess the follow:

The Enable/Disable Button, describe the actual status of service.
The Start, Restart and Stop Button, offer, what can be selected

nopro404 · 2019-05-30T19:06:18.115Z

That is the ‘Initscripts’ startup section.

An Init script is a script that starts a service on boot up.

If you Enable the init script it will be started on boot.

If you Disable the init script it will not be started on boot.

Regardless if the service init script is Enabled or Disabled to start on boot up, you can still Start, Stop, or Restart (Stop and then Start) a service.

Henry_Bruns · 2019-05-30T21:10:25.340Z

Your information are clear for me. A, the"Enable", “Disable” Button is still not clear for me. Do the follow picture show actual running services or disabled services?

nopro404 · 2019-05-30T21:25:26.456Z

Those all say ‘Enabled’ meaning they are configured to start on boot. That screen does not know if the service is actually running or not currently.

Henry_Bruns · 2019-05-30T21:35:06.512Z

nopro404:

Those all say ‘Enabled’ meaning they are configured to start on boot. That screen does not know if the service is actually running or not currently.

Thanks in advanced. Now its clar for me.

Thats mean, all services which are shown on follow picture, are active with on picture shown configurartion, on boot time: https://forum-static.gl-inet.com/original/2X/d/de40af7122116a392d73b7ba8d74d41a102eb052.png

Thaaaaankkkkkkkssss !!!