# VPN Connection to two separated networks **URL:** \ **Category:** VPN, DNS, Leaks\ **Created:** [January 30, 2024, 2:30am UTC](https://forum.gl-inet.com/t/vpn-connection-to-two-separated-networks/37959 "2024-01-30T02:30:51Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\ **Post date:** [January 30, 2024, 7:00am UTC](https://forum.gl-inet.com/t/vpn-connection-to-two-separated-networks/37959/2 "2024-01-30T07:00:06Z")
So that I’m understanding correctly: - Beyrl is the WG Client - Burme 2 is _a_ WG Server - FRITZ!Box 4060 is a different WG Server The Beryl WG Client connection will be manually toggled in the GL GUI → VPN → WG Client when you want to use either/or, correct? I haven’t used any FRITZ!Box equipment so this could well be hearsay but IIRC their implementation is an adulterated version of WG. It doesn’t/didn’t play nice with ‘pure’ WG, which is what the Beryl uses. Ah! Found it: > [@Problem to setup WG config: GL-AR300M -\> Wireguard -\> FritzBox](https://forum.gl-inet.com/t/problem-to-setup-wg-config-gl-ar300m-wireguard-fritzbox/31422): > > I have trouble to setup a wireguard vpn config. What I want to do ? I want to use the GL Router as VPN Gateway to a FritzBox in other location. The GL-AR300M should provide a Wifi which routes all traffic to the remote Fritzbox. Location A: GL-AR300M (192.168.8.1) \> FritzBox 7590 (192.168.178.1) \> (WAN = DSL) Location B: FritzBox 7530 (192.168.177.1) (WAN = Cable) I configured the FB 7530 in Location B as Wireguard Server. Made profiles for all my devices (iPhone, iPad, Mac, Windows Device … There’s a related link to a potential solution that might work, too. Re: Burme 2 ↔ FRITZ!Box 4060 I think you’re looking for a S2S between those two WG peers/endpoints. See the following HOW-TO base on using two GL devices. The steps should be similar, sans GUIs, in your case: > [@Building a Site-2-Site network manually using two GL.iNet routers(SDK 4.X)](https://forum.gl-inet.com/t/building-a-site-2-site-network-manually-using-two-gl-inet-routers-sdk-4-x/31479): > > This post is to introduce the guide to config WireGuard LAN to LAN VPN (Site-2-Site) based on GL-iNet SDK 4.X fimrware. Supported Models Router Model Stable Beta GL-MT3000 (Beryl AX) √ - GL-AXT1800 (Slate AX) √ - GL-A1300 (Slate Plus) √ - GL-X3000 (Spitx AX) √ - GL-AX1800 (Flint) √ - GL-MT2500 (Brume 2) √ - GL-AR300M (shadow) - √ GL-MT300N-V2 (Mango) - √ GL-E750 (Mudi) - √ GL-SFT1200 (Opal) - √ GL-MT1300 (Beryl) - √ GL-X750 (Spitz) - √ GL-XE300 (Pul… --- _[View the full topic](https://forum.gl-inet.com/t/vpn-connection-to-two-separated-networks/37959)._