# VPN routings

**URL:** <https://forum.gl-inet.com/t/vpn-routings/18746>\
**Category:** Router\
**Created:** [December 4, 2021, 1:57pm UTC](https://forum.gl-inet.com/t/vpn-routings/18746 "2021-12-04T13:57:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gawelp](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/g/4491bb/32.png) [@gawelp](https://forum.gl-inet.com/u/gawelp)\
**Post date:** [December 4, 2021, 1:57pm UTC](https://forum.gl-inet.com/t/vpn-routings/18746/1 "2021-12-04T13:57:24Z")

</div>

Hello I need help configuring GL-MV1000.

I have main Sabai VPN Server on 10.178.225.1 in a local location Home and I have connected GLMV100 VPN WireGuard Client on 10.178.225.16 in a location Remote.

I can tell that if I’m in location Remote, I can access all devices in either locations, but  
If im in location on the home server, I can access only GLM1000 device itself, no devices connected to it which it is my issue. I think it has something to do with routings, but i could be wrong.

Can you please let guide me in the right direction so i could have full access to all devices in either locations Home and Remote. Thanks, Piotr

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [December 5, 2021, 6:40am UTC](https://forum.gl-inet.com/t/vpn-routings/18746/2 "2021-12-05T06:40:01Z")

</div>

Pls check this guide

> [@Building a Site-2-Site network manually using two GL.iNet routers](https://forum.gl-inet.com/t/building-a-site-2-site-network-manually-using-two-gl-inet-routers/18294):
>
> This post is to introduce the guide to config LAN to LAN VPN (Site-2-Site) based on WireGuard. Network Topology [image] 1.Login the web interface of AX1800, go to VPN \> WireGuard Server and click on the Start button to enable the WireGuard Server. [image] Note: make sure the Allow Access Local Network button is enabled. 2.Go to Management and click on Add a New User. [image] 3.Click the file icon on Configurations to review the profile. [Interface] Address = 10.0.0.2/32 List…

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:15am UTC](https://forum.gl-inet.com/t/vpn-routings/18746/3 "2025-10-29T04:15:41Z")

</div>


