1

Hello,

I recently updated my TravelRouter Opal (GL-SFT1200) and GL-AR750S-EXT to the newest/latest FW.
Since I update the devices, the VyyprVPN doset work anymore.
→ can’t connect!
I tried a test with (free test account, ExpressVPN) and here the VPN connect/works.

On my old GL-AR300M (FW3.104) the VyprVPN works.

I assume a problem with the newer FW that are provided by GLiNet.

Any idea? Known issue?

Thx Peter

2

Check if you have this line and remove it. Then upload your ovpn again.

compress lzo

If this is not the case, pls post your ovpn content for a check.

3

Hi,

I’m sorry but I have no idea what to do with this info.
Can you give me a hint?

Thx Peter

4

I mean your ovpn file. Post its content (remove cert etc)

5

Hi,
i oped the OVPN file and it starts with this:

client
dev tun
proto udp
remote de1.vyprvpn.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
verify-x509-name de1.vyprvpn.com name
auth-user-pass
comp-lzo
keepalive 10 60
verb 3

→ i have comp-lzo in there. Should I remove this line and retry?

Thx Peter

6

Yes. comp-lzo is deprecated in OpenVPN 2.4 and higher.

Does VyprVPN not support WireGuard? It would make your life a lot easier (and probably happier with the increased bandwidth).

7

This should not be the problem. The problem is “compress lzo” not supported.

Does the UI show some error?

8

Hi actually situation:
My GL-AR300M, FW 3.104 works fine.

The GL-MT1300 and GL-AR750S with latest FW 3.203 does not connect (details below).
When I remove the COMP-LZO, it connects but is slow like hell, not usable.

MSG out of the connection window:
1St:

*VERIFY OK: depth=1, C=CH, ST=Lucerne, L=Meggen, O=Golden Frog GmbH, CN=VyprVPN Intermediate CA, emailAddress=admin@goldenfrog.com*
  • *VERIFY X509NAME OK: C=CH, ST=Lucerne, L=Meggen, O=Golden Frog GmbH, CN=de1.vyprvpn.XXX, emailAddress=admin@goldenfrog.com
  • *VERIFY OK: depth=0, C=CH, ST=Lucerne, L=Meggen, O=Golden Frog GmbH, CN=de1.vyprvpn.XXX, emailAddress=admin@goldenfrog.com
  • *Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
  • *[de1.vyprvpn.XXX] Peer Connection Initiated with [AF_INET]128.xx.xx.xx:1194

2nd:

  • TCP/UDP: Preserving recently used remote address: [AF_INET]128.xx.xx.xx:1194*
  • *Socket Buffers: R=[163840->163840] S=[163840->163840]
  • *UDP link local: (not bound)
  • *UDP link remote: [AF_INET]128.90.96.26:1194
  • *TLS: Initial packet from [AF_INET]128.90.96.26:1194, sid=eef27c16 630233ec

mhh…