WDS repeater and seeing attached clients

limbot · 2019-07-09T22:03:28.151Z

I have a B1300 in WISP repeater mode and then attached to that a B1300 in WDS repeater mode. All works well however I can only see the clients attached to the WISP repeater via the Clients tab. On the WDS there is no Client mode and devices attached to the WDS do not appear on the main WISP repeater client list.

Is there any way I can make this happen?

jeffsf · 2019-07-09T22:57:31.641Z

The information is with the AP that the client is associated with. You’d need to script something and a custom screen to aggregate.

limbot · 2019-07-09T23:01:04.291Z

@jeffsf

OK thanks for that. Beyond my skill set

Guess Id better have another go at getting the mesh working as I know this will give me what I want (skill and time poor )

B1300 Mesh "issues" Technical Support for Routers

Not ok with WinSCP. The key is passed by WPS and then consecutive settings. You can push both unit again. No need other operation.

limbot · 2019-07-10T23:10:29.598Z

Ok

Finally got around to trying Mesh again and got it working. Must have held my tongue just in the right position

Mesh gives me exactly what I wanted, a list of all devices. I’ve used the hostnames file to change those that either had weird names or no names and all is good:

image2288×1553 257 KB

Can even tell what node they’re attached to and on which band:

image2255×1343 163 KB

All is good in the world