Welcome to test AX/AXT1800 official beta firmware with kernel 5.4

240038901 · 2022-06-27T14:51:06.264Z

For AXT1800
for uboot: https://glinet-forum-cn.oss-cn-shenzhen.aliyuncs.com/firmware/AXT1800-KERNEL5.4/openwrt-ipq807x-glinet_axt1800-squashfs-nand-factory.img

for web upgrade: https://glinet-forum-cn.oss-cn-shenzhen.aliyuncs.com/firmware/AXT1800-KERNEL5.4/openwrt-ipq807x-glinet_axt1800-squashfs-sysupgrade.tar

For AX1800:
for uboot upgrade:https://glinet-forum-cn.oss-cn-shenzhen.aliyuncs.com/firmware/AX1800-KERNEL5.4/openwrt-ipq807x-glinet_ax1800-squashfs-nand-factory.img (only UI3.x to UI4.0)

for web upgrade: https://glinet-forum-cn.oss-cn-shenzhen.aliyuncs.com/firmware/AX1800-KERNEL5.4/openwrt-ipq807x-glinet_ax1800-squashfs-sysupgrade.tar

tuapuikia · 2022-06-27T18:17:33.358Z

Did it fix the wisp with 5ghz band + wpa3 issue? I can’t connect to remote AP that used wpa3.

240038901 · 2022-06-27T18:32:16.190Z

Do not test wpa3，you can try it.

RevelRob · 2022-06-27T21:05:32.035Z

Why is this not on the official downloads site for Gl-iNet?

panpan · 2022-06-28T01:32:55.166Z

These firmware files were made by @robotluo and he only post them on our Chinese forum.

robotluo · 2022-06-28T01:35:13.907Z

240038901 is a user of Glinet but not an employee of Glinet.
The firmware in the link is a test firmware compiled by me, which was originally intended for DIY users in China without a lot of testing.
However, since users have made the link public, they can also report back if they find problems during use

DienoX · 2022-07-21T18:46:28.538Z

Is there an update available?

danbratu · 2022-09-09T14:56:35.143Z

still no updates? it’s been a while…

tmash · 2022-09-21T19:47:16.167Z

Client (WDS) mode does not work with the 5.4 kernel
5Ghz AX is faster ingress, slower egress, the opposite with the older kernel.
~750 Mbit down, ~550 Mbit up with Intel AX200
There are much less TCP retransmission on Wi-Fi with the new kernel.