Where can I find the files to edit the UI?

simonwjackson · 2020-02-24T21:57:13.269Z

I would like to make some modifications to the web UI.
Older posts refer to /usr/share/glweb but this does not exist on my device (E750)

Any ideas?

Johnex · 2020-02-25T01:30:28.568Z

The webserver paths changed from firmware v2 to the new v3 that the E750 runs. The new path is:

/www/src

simonwjackson · 2020-02-25T20:44:36.325Z

There they are, thanks!

Now my only concern is files getting overwritten when the firmware gets updated.

Is there a git repo for the web UI?

Johnex · 2020-02-25T21:01:09.366Z

The GL UI is propietary so closed source unfortunately. When you make your custom firmware using the GL Imagebuilder from here:

GitHub

GitHub - gl-inet/imagebuilder: Warning！Please look at 'GL.iNET Imagebuilder...

Warning！Please look at 'GL.iNET Imagebuilder Introduction' section. - GitHub - gl-inet/imagebuilder: Warning！Please look at 'GL.iNET Imagebuilder Introduction' section.

You can replace any files you want

More on that is on the imagebuilder page, as well as here:

Image builder fail to load custom files for firewall in GL-AR150 Technical Support for Routers

HI Im looking how to create a custom image for GL-AR150 with custom files,and Im using Imagebuilder from Github All part to update and install packages goes nice, my problem is to use files function. In my case Im checking to use “customize.json” file from root imagebuildrer folder adding this lines “project”:{ “profile”: “gl-ar150”, “version”: “3.027”, “imagebuilder”: “3.1/openwrt-imagebuilder-ar71xx-generic_3.1”, “packages”: “gl-base-files-ar $basic $vpn $storage $usb $glinet tcpdump …