# Wifi client without repeater on Baryl AX

**URL:** <https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251>\
**Category:** Router\
**Created:** [December 2, 2024, 5:33pm UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251 "2024-12-02T17:33:07Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hollyg](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/h/a9a28c/32.png) [@hollyg](https://forum.gl-inet.com/u/hollyg)\
**Post date:** [December 2, 2024, 5:33pm UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251/1 "2024-12-02T17:33:07Z")

</div>

Is it posible to use Baryl AX as wifi client (bridge to LAN ports) only, without retransmiting its own wifi network? I can make it as such in repeater mode, then disable wifi, but it stay connected only for a while or until the first restart. Then it dont connect to upstream wifi anymore without enabling wifi again.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [December 3, 2024, 10:15am UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251/2 "2024-12-03T10:15:24Z")

</div>

I tested in MT3000 with v4.7.0 firmware, and disable all WiFi, and the repeater connected **normal** and re-connect **normal** when the router rebooted.  
Cannot reproduce.

1. please share the syslog
2. SSH:

```auto
cat /etc/config/wireless
cat /etc/config/repeater

```

Checked twice, after repeated and after rebooting (cannot repeat).

---

<div class="post-metadata">

**Author:** ![hollyg](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/h/a9a28c/32.png) [@hollyg](https://forum.gl-inet.com/u/hollyg)\
**Post date:** [December 4, 2024, 12:20am UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251/4 "2024-12-04T00:20:40Z")

</div>

I tried on 4.6.9 and then on beta 4.7.0. Upstream wifi is Flint2.  
[log.txt.zip](https://forum.gl-inet.com/uploads/short-url/mIdVdNm2ljyRykZh70M4AmNNySw.zip) (1.6 KB)

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [December 11, 2024, 7:20am UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251/5 "2024-12-11T07:20:29Z")

</div>

The configuration of the wireless and repeater seem does not issue.

But the syslog did not share with me, please PM me the syslog, export from GL GUI -\> System -\> Log.

Since I did not reproduce this issue in my router with v4.7.x, if possible please reset the MT3000 and try it one more time in the v4.7.0

---

<div class="post-metadata">

**Author:** ![system](https://forum-static.gl-inet.com/original/3X/7/7/77e28f6cb342ac4bd641bd9a6254595d61b2812a.png) [@system](https://forum.gl-inet.com/u/system)\
**Post date:** [July 20, 2025, 9:42am UTC](https://forum.gl-inet.com/t/wifi-client-without-repeater-on-baryl-ax/51251/7 "2025-07-20T09:42:29Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.