wifiMgr - Tool to automaticaly select an AP(STAtion) from a list of saved APs

guest · 2016-02-21T22:00:31.000Z

How could I have missed this post! This is (if it works on a MiFi) exactly what I need

Will report back later.

An option to use the 3/4G modem when NO Wi-Fi AP is connection would be even better

rangerz · 2016-02-22T00:38:35.000Z

Good idea!

Unless the modem is configured as a wireless STAtion, then I think not. There is no logic to do anything or test for anything other than the list of wireless APs, and overwrite the existing config with another.

Line 80 is where the existing wireless STA is set to disabled. It’s the point in the logic that it has been determined that there is no WWAN. You probably would want to connect to the 3g/4g modem here. Line 96 is where a found STAtion is reconfigured. You would probably want to turn off the modem there. The general logic tests for a functioning internet via ping. When a working internet is found APs are not tested, and there is no logic that would say there is a working STAtion that is now in range.

Fixing this is not in my skill set

rangerz · 2016-02-22T04:08:58.000Z

How one would go from [WWAN <=> WLAN] to [3G\4G <=> WLAN] or visa versa?

guest · 2016-02-22T06:10:30.000Z

Something like this?

ifdown $WAN2 # Shutdown WAN2 ifup $WAN1 # Enable WAN1

Or am I thinking to simple?

If there is a Wifi connection, no 3G/4G is needed (ifdown 3/4G)… As soon as Wifi connection is down, connect 3/4G (ifup 3/4G)… If wifi is back again, ifdown 3/4G… ??

rangerz · 2016-02-22T08:13:03.000Z

Well, that’s about the kind of answer I was hoping for. Have you tested these strings?

I would expect that the 3g/4g is all configured and that all one needs to do is somehow disable the wifi and enable the 4g. How long does it take the 4g to connect? Is there any user interaction required once it’s configured.

Where is the config for the 3g\4g maintained? can you please post this?

guest · 2016-02-22T17:17:25.000Z

Sorry… Can’t help at the moment. I’m about to go for a 2 weeks holiday

The script I used came from the OpenWRT forum, and used it with one of my 150 routers together with a 3G USB stick.

script and info can be found here: OpenWrt Forum Archive

I needed to modify it a little bit to make it work perfect.
My modified code: #!/bin/sh INTERVAL=5PACKETS=1HOST="8.8.4.4"WAN1=wanWAN2=3GUSINGWAN - Pastebin.com
(I used Pastebin as this forum is messing things up with code)

You will still need to set all the things/right as described in the 1st post (see script and info link above)!

axebro · 2016-02-28T23:41:50.000Z

So the first question I see from reading through code and readme file is, what happens if your ap doesn’t have a key? Most of the public ones I connect to do not. Do you leave the config out?

Net_key1=“”

Also, will ping work before signing into a captive portal?

I love that you don’t need BSSID - that’s what kills the set up for me.

rangerz · 2016-02-29T01:33:12.000Z

I do not know the answer to either question. Not tested this scenario.

I expect you are right about the key value. I changed the security on my AR150 from the default to none. It changed the encryption to “none” but did not update the “option key” value. The password was still as it was for the encryption, and probably needs to be null or the line deleted. One you can test, the other requires code mods.

The value of the encryption probably needs to be set to

net8_encrypt=“none”

axebro · 2016-02-29T03:33:32.000Z

I’m going to test a bit more.

Good thing is i have 1 weaker spare (the HooToo), and a better TPLink that’s my main one (seems faster).

My goal is to avoid having to whip out the laptop for config. Yours seems to cover most (traveling and staying with family, and my cable co hotspots). that covers about 75% of my current need.

Thanks for posting this.

rangerz · 2016-02-29T07:51:25.000Z

Yes, you hit the nail on the head. The big issue that I have with all the devices, other than the GLI with the GLI GUI, and all the solutions rely on the OpenWrt GUI that is just not usable on a phone.

That said, all my testing has been using the Luci-Wifi. I just tested the GLI GUI (once), by using Luci-Wifi to set the WWAN to disable (simulating the scenario that the last WWAN is no longer available, and the WWAN is set to disabled to allow the WLAN to work). It appears the GLI GUI does NOT update the option disabled flag from 1 to 0 when a new SSID is selected. I think this GUI will not work with wifiMgr for that reason, which is very unfortunate.

Please test and confirm.

axebro · 2016-02-29T08:41:35.000Z

The default OpenWrt wireless has the STA (client) listed first and the Master second. The order needs to be reversed in the wireless file. It relies on the STA interface being the wifi-iface[1]. This is not in the readme.txt file.

Can you explain that? Do I need to manually make this change before I copy the files over?

The reason I ask is, I didn’t do this step, and went in and configured 3 wifi locations. 2 are right here in my house but since I did that - the device has been extremely unstable, I can’t even get in via Ethernet.

I don’t have a GLI device yet, but am leaning towards one. I noticed there’s a “new” version out … so tempted to get it. Then I realize I’ve spent so much time/money on this travel concept. Why the hell can’t we have something solid yet?!

rangerz · 2016-02-29T20:31:43.000Z

Yes!

A basic wireless file has 3 sections. the first defines the physical device. The second two define the “connections”. The sequence of these dictates which is iface[0] and iface[1]. The tool requires the STA to be the second entry, wifi-iface[1]. If not you will end up with 2 STAtions.

Easist way is to use WinScp and navigate to /etc/config and open the wireless file in the included text editor.

axebro · 2016-03-01T20:20:09.000Z

Have you tried this with your hootoo tm02? I’m having a hard time. tried twice, and it doesn’t seem to associate with anything (my cell phone hotspot, or the cable company one).

Then again for that matter, the cable co wifi has been so hard to get associated with even via LUCI. I actaully opened up a thread over at OpenWRT to see if PEBKAC or something else.

I’m going to be traveling in about a month, hoping to have this stuff licked before I get out.

rangerz · 2016-03-01T22:48:06.000Z

I have not tried it with the HooToo, but have with another MT device. I have 2 radios in mine, but still expect it to work. I will try, but it may be a day or 2.

Please post your wireless, firewall, network and logs.

You might try

Disable wifiMgr

restore a known good config

edit the wireless file (making sure the AP is the first iface)

enable wifiMgr

reboot

axebro · 2016-03-02T11:11:26.000Z

well other than Optimum Wifi not workign (or sporadically working) even my cell phone hotspot is not working



Wed Mar  2 02:58:28 2016 user.notice root: WifiMgr: No usable APs found, disabling the WWAN.
Wed Mar  2 02:58:28 2016 user.notice root: WifiMgr: Checking network...
Wed Mar  2 02:58:29 2016 user.notice root: WifiMgr: Network failed. Starting network change...
Wed Mar  2 02:58:29 2016 user.notice root: WifiMgr: Performing network scan...
Wed Mar  2 02:58:48 2016 user.notice root: WifiMgr: WifiMgr: Searching available networks...
Wed Mar  2 02:59:01 2016 user.notice root: WifiMgr: No usable APs found, disabling the WWAN.
Wed Mar  2 02:59:02 2016 user.notice root: WifiMgr: Checking network...
Wed Mar  2 02:59:02 2016 user.notice root: WifiMgr: Network failed. Starting network change...
Wed Mar  2 02:59:02 2016 user.notice root: WifiMgr: Performing network scan...
Wed Mar  2 02:59:22 2016 user.notice root: WifiMgr: WifiMgr: Searching available networks...

can you clarify how you are starting this? safe to assume you didn’t copy over the wifimgr to /etc/init.d right?

LINK to Log:

Pastebin

Log - Pastebin.com

Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.

rangerz · 2016-03-03T00:52:33.000Z

The messages look consistent with what one would see when there is no available STAtion to connect to. In the pastebin however I do not see any evidence that wifiMgr is running (search on wifiMgr)

There are three files with wifiMgr in the name. The one that is just wifiMgr does go in the /etc/init.d folder.
You did not post the other files, only the logs.

axebro · 2016-03-04T05:11:42.000Z

Thanks,

Sorry - I reset the router a few times and didn’t have time to redo. Just did everything again, I put contents of firewall, wireless and network in one paste:

Pastebin

firewall, wireless and network - Pastebin.com

Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.

Let me know if you see anything awry.

rangerz · 2016-03-06T05:05:55.000Z

I see one possible problem, and unclear why.

Is the WORK SSID in your wifiMgrcfg file?

In your wireless file you have

option bssid ‘[MAC Address]’ (removed the actual values)

If you manually added the WORK SSID via Luci then this is probably OK, if it is in your wifiMgrcfg then there is an issue as to why. wifiMgr should delete this.

Try deleting this line from your wireless file.

Please post your wifiMgrcfg file.

tinyema · 2016-03-10T22:16:46.000Z

Hi RangerZ, great work! It work like a charm!

I have a suggestion… I scheduled a crontab job to fallback to ther first network every hour (wifiMgr.sh --force 1) and it’s working fine, but if I’m already connected to ssid1, it drop anyway the connection for few seconds, because it put wlan0 down, it scan ecc. ecc.

I’ve done this little mod to handle it…

Ciao

ema

NetChange()
{
if [ “$1” ]; then
ssid=net"$1"_ssid
eval ssid=$$ssid
msg=“Force connection to network $1: $ssid”
logger WifiMgr: $msg
echo $msg
cursid=$(uci get wireless.@wifi-iface[1].ssid)
if [ “$cursid” = “$ssid” ]; then
msg=“Already connected, nothing done!”
logger WifiMgr: $msg
echo $msg
return
fi
fi

logger WifiMgr: Performing network scan…
scanres=
ifconfig wlan0 down

rangerz · 2016-03-11T02:35:58.000Z

Thanks for the very nice enhancement. I am not a programmer, so think I am missing something in the logic\code. Does this enhancement now run on every “ConnCheckTimer” interval? If so does it not always try to set the network to the first entry, and then if it’s not found continue through the list? Would this not bounce the network every “ConnCheckTimer” interval if the forced station is NOT available?

This issue is similar to the one that exists when the wireless is set to disabled. It bounces the wireless to set it disabled again. Would you be willing to take a stab at fixing this problem, which is at line 79-81, and should have a conditional check to see if the wireless is already disabled, if so skip, if not perform those lines?

Are you using an AR-150? If so have you tested changing the STAtion by using the GLU GUI? GLI sets the config to use WAN as opposed to WWAN, and not sure if this causes an issue. I think it’s OK if you only use this as opposed to using both the GLI GUI and Luci. If you use both you may have some interface issues I think.