2

My best friend has the E3372 and it does work. However, be careful with the version you order.

If you order the E3372H, you will only have “tethering” ie, the router will detect it as an iOS device. The H version has the webui for settings. The downside is that the connection is emulated in a way, and there are lots of reports that it is slower than the following one.

If you order the E3372S, then the router will control all the settings as if it was an internal module, and you will also have a higher speed because the protocol is faster. The E3372S can also be changed from stickmode to “hilink” mode (like the H) using just some flashing tools.

To flash the H version, you must open the case and bridge a test point to ground EVERY TIME, and use a special firmware uploader via commandline (ie more hacky).

Unfortunately my friend has the H version and we are thinking about flashing it to stickmode for better performance.

1 Like