# Wireguard Active?

**URL:** <https://forum.gl-inet.com/t/wireguard-active/8274>\
**Category:** Router\
**Created:** [September 19, 2019, 3:18pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274 "2019-09-19T15:18:30Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![klaberte](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/4bbf92/32.png) [@klaberte](https://forum.gl-inet.com/u/klaberte)\
**Post date:** [September 19, 2019, 3:18pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274/1 "2019-09-19T15:18:30Z")

</div>

I’m using v3.027 on a B1300, which I have set up as a Wireguard server. When I connect to it from a client, I see no notification of that fact. IIRC, earlier versions changed the image on the home (Internet) screen, specifically the VPN shield. That may have been when I was using OpenVPN in the past. That is not happening now.

How can I tell if my B1300, acting as a Wireguard server, currently has an active connection to a client?

---

<div class="post-metadata">

**Author:** ![dzwghx](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/4bbf92/32.png) [@dzwghx](https://forum.gl-inet.com/u/dzwghx)\
**Post date:** [September 20, 2019, 6:18am UTC](https://forum.gl-inet.com/t/wireguard-active/8274/2 "2019-09-20T06:18:03Z")

</div>

You can ssh to the router and run the command wg to view

---

<div class="post-metadata">

**Author:** ![klaberte](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/4bbf92/32.png) [@klaberte](https://forum.gl-inet.com/u/klaberte)\
**Post date:** [September 20, 2019, 2:17pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274/3 "2019-09-20T14:17:18Z")

</div>

This misses my point. I believe the visual confirmation on the web-configuration works for OpenVPN, but not WireGuard. I am asking why the difference.

---

<div class="post-metadata">

**Author:** ![Johnex](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/johnex/32/300_2.png) [@Johnex](https://forum.gl-inet.com/u/Johnex)\
**Post date:** [September 20, 2019, 8:14pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274/4 "2019-09-20T20:14:50Z")

</div>

![48](https://forum-static.gl-inet.com/original/2X/7/7fd97c21033942aa82a6867b9f6e1a452412f129.png)

There is a client list in the wireguard server page of active clients 🙂

The shield only changes when you are connected as a client using a GL router to a remote server, not when hosting the server.

---

<div class="post-metadata">

**Author:** ![klaberte](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/k/4bbf92/32.png) [@klaberte](https://forum.gl-inet.com/u/klaberte)\
**Post date:** [September 20, 2019, 8:48pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274/5 "2019-09-20T20:48:30Z")

</div>

What precisely is ‘last connected’ mean?

---

<div class="post-metadata">

**Author:** ![Johnex](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/johnex/32/300_2.png) [@Johnex](https://forum.gl-inet.com/u/Johnex)\
**Post date:** [September 20, 2019, 11:26pm UTC](https://forum.gl-inet.com/t/wireguard-active/8274/6 "2019-09-20T23:26:24Z")

</div>

Time since the device was connected last.

So you will see a list of all clients that have connected to your server, and the last times they connected.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:09am UTC](https://forum.gl-inet.com/t/wireguard-active/8274/7 "2025-10-29T04:09:02Z")

</div>


