We are thinking about it.
If anyone else has a similar request, please let me know, thanks.
3 Likes
I think performance/speed will be reduced with 2 Wireguard/VPN, probably same for VPN cascading.
I do not work for and I do not have formal association with GL.iNet
I have an interest in this, in a similar way particularly with openvpn using udp as a primary VPN and tcp on port 443 as a secondary VPN when udp cant connect.
Some hotspots only allow HTTP and HTTPS traffic, so it would be great to be able to use the great VPN policy that the GLinet interface allows to connect, but still allow internet traffic as long as at least one tun is up
does VPN policy (i.e. excluding certain ip addresses from the tunnel) work with multiple luci configured vpns?
I have now configured the whole thing via the Advanced (Luci). It works perfectly with the two tunnels.
Of course it would be great if you could do it all with the GL.iNet GUI (The adjustment shouldn’t take that long for the GUI)
I think the GUI should be revised and allow more than one tunnel from each instance in Route Mode with Customize Routing Rules (WG, OpenVPN).
1 Like
This was on the dev schedule actually. Just too big change in firmware 4.x and have to make everthing work correct now before adding more features.
1 Like
If or when you add the feature, allow any number of of Wireguard/OpenVPN connections, or someone will request it later
2 Likes
To who it may concern,
I’d also like to use this feature from the main GUI as well as assigning clients to each of the VPN tunnels for different services from each VPN connection.
Regards
John
This would be a killer feature for me. When I travel with family I would like to have multiple Wireguard client connections at the same time, one which provides my devices admin access to my infrastructure, the other one which just secures internet access for the rest of my family.
So multiple VPN clients running at the same time + the ability to route devices connected to those VPNs
I am also looking for this! I was hoping to route traffic through 2 VPNs by policy (IP/domain), so that all google stuff goes through one VPN and my remaining traffic goes through the second VPN.
Also, thank you all for the hard work and long support life of your devices. 
It would be pretty handy! I’m interested in that feature too. Thanks for your work!
I also need something similar!
I’d like to use one WG connection with a per-domain policy like I have now. And the second WG connection only for guest Wi-Fi. Is it possible now?
The firmware does not support this configuration at this time.
Hello, I have the same router (gl-ax1800) and need to have multiple vpn clients. Can you please share your configuration files? Thanks
Check “Route Mode” on this page:
I also have the ax-1800 and axt-1800 and there is only one wireguard connection possible. Some Asus routers actually allow this.
I for example, want to put my media devices behind a vpn in one country, and some other devices behind another.
I’m interested in it too. Is there any news about whether and when this function will come?
This would be great. Ideally could have a 3rd SSId and link that to the additional connection as well.
Basically want to have clean Internet on one SSId, vpn1 on one SSId, and vpn2 on a second SSId.
s2s and wireguard client can be used at the same time.
While s2s VPN is for company network, wireguard client is for internet.
We’ll evaluate the implementation based on firmware 4.5.
With parallel connection would be possible to increase bandwidth on with latency networks?