Wireguard Interfaces missing in Luci

mat1 · 2021-01-16T13:44:53.211Z

Hello,

i need to configure some DNAT and SNAT Rules for my wireguard VPN.

I saw that

wg0 the vpn server is missing in the interfaces within luci
the wireguard firewall zone has in its config files a device soecified (wg0) - but this is not visible within luci?

Can I simply create the missing wg0 interface (what i see via ssh with ip a on the router) under luci or will this break my vpn?

I‘ve also seen that my interface LAN has no interface specified in the config (the file contains a whitespace). Does rules within this Zone/Interface are working? Do you know where I can find the default content of /etc/config/firewall wirhout the need to reset the device?

Thank you
Matthias

mat1 · 2021-02-17T21:17:27.172Z

@Leo can you help here?

Leo · 2021-02-19T04:14:14.146Z

Sorry, I don’t know this.

mat1 · 2021-03-02T20:16:44.788Z

@alzhao can you also check this issue? I thin the interfaces should here for advanced configurations. Where we can place feature requests?

alzhao · 2021-03-03T11:13:07.816Z

Seems that you need to create the interface manually.

image702×533 35.5 KB

mat1 · 2021-08-27T16:56:20.060Z

@alzhao when I create the interface manually, then the S2S connection drops, so It’s not working.
How I manage to set a firewall-rule on a S2S tunnel (using wg1)?

alzhao · 2021-08-30T04:30:47.637Z

mat1:

hen I create the interface manually, then the S2S connection drops, so It’s not working.
How I manage to set a firewall-rule on a S2S tunnel (using wg1)?

I see. If you use S2S, better not to touch the config manually.