WireGuard Server generating config "ERROR: Timeout"

Flint GL-AX1800 WireGuard Server is failing to generate a user configuration with “ERROR Timeout”.

The router isn’t connected to the Internet, but I don’t see how that is required for generating a user config, am I wrong?

Running Firmware 3.214

The GL.iNet router at least needs to know the Public IP address for the Endpoint in the configuration file.

I do not work for and I do not have formal association with GL.iNet

If that’s the case, is it possible to connect the GL-AX1800 to my current primary router LAN to LAN to get it online?

You should connect the GL-AX1800 WAN port to primary router LAN port. If you connect LAN-to-LAN, then you will get 2 DHCP servers from both routers on one LAN, which is not recommended.

Correct, but you can also disable the DHCP on LAN from within LuCI from what I’ve read. :slight_smile: